Accessories

ACCES Accessories

OFFERING A WIDE VARIETY OF ACCESSORIES FOR OUR BROAD PRODUCT LINE

These accessories include screw terminal boards, cables, adaptors, DIN rail, signal conditioning, enclosures, and more. If you don’t see what you need, ask us and we will make it for you.

Click a button below to jump to our accessory categories.

Terminal Adapter Accessories

ModelDescription
TAD12-8

These are for use with Analog and Digital cards model AD12-8

Features include:

  • Provides screw terminal termination for analog inputs
  • Separates screw terminals for digital inputs and outputs
  • Have pin-names instead of numbers associated with them
Show details
STB-96CH

This screw terminal board allows you to break out signals from an I/O card to screw terminals for easy field signal wiring of relays, sensors and switches commonly found in industrial environments. It features 50 position header connectors and can be used with any I/O card that has a compatible 50 pin mating connector. The STB can be mounted using the provided 4/40 x ½ inch standoffs to a panel or plate. It was designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board ships inside a steel powder-coated enclosure with an anti-skid bottom. A DIN rail mounting provision is available for installation in industrial environments. Typical mating cables (Model CAB50F-6) are flat ribbon cables used to connect with a variety of ACCES I/O’s digital I/O products.

The STB-96CH has four 50 pin headers and can be used for interfacing with our PCI-DIO-96, USB-DIO-96, or P104-DIO-96.

For old-school applications this product is useful with many of our legacy ISA digital I/O products.

Show details
STB-74 KIT

74 Terminal Breakout Board w/ Mounting Kit

Show details
STB-74

74 Terminal Breakout Board

Show details
STB-72CH

This screw terminal board allows you to break out signals from an I/O card to screw terminals for easy field signal wiring of relays, sensors and switches commonly found in industrial environments. It features 50 position header connectors and can be used with any I/O card that has a compatible 50 pin mating connector. The STB can be mounted using the provided 4/40 x ½ inch standoffs to a panel or plate. It was designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board ships inside a steel powder-coated enclosure with an anti-skid bottom. A DIN rail mounting provision is available for installation in industrial environments. Typical mating cables (Model CAB50F-6) are flat ribbon cables used to connect with a variety of ACCES I/O’s digital I/O products.

The STB-72CH has three 50 pin headers and is perfect for our PCI-DIO-72 card.

For old-school applications this product is useful with many of our legacy ISA digital I/O products.

Show details
STB-48CH

This screw terminal board allows you to break out signals from an I/O card to screw terminals for easy field signal wiring of relays, sensors and switches commonly found in industrial environments. It features 50 position header connectors and can be used with any I/O card that has a compatible 50 pin mating connector. The STB can be mounted using the provided 4/40 x ½ inch standoffs to a panel or plate. It was designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board ships inside a steel powder-coated enclosure with an anti-skid bottom. A DIN rail mounting provision is available for installation in industrial environments. Typical mating cables (Model CAB50F-6) are flat ribbon cables used to connect with a variety of ACCES I/O’s digital I/O products.

The STB-48CH is our most popular model and has two 50 pin headers and is ideal for interfacing with a multitude of products such as our PCI-DIO-48S, PCI-DIO-48, USB-DIO-48, P104-DIO-48, 104-DIO-48S or 104-DIO-48E.

For old-school applications this product is useful with many of our legacy ISA digital I/O products.

Show details
STB-37/1 KIT
STB-37/1 KIT

Kit, One STB-37, Cable, 6″ SNAP-TRACK

Show details
STB-37/1 KIT-CL
STB-37/1 KIT-CL

Kit, One STB-37, Cable, 6″ SNAP-TRACK, DIN Rail Clips

Show details
STB-37/2 KIT
STB-37/2 KIT

Kit, Two STB-37’s, Y Cable, 1′ SNAP-TRACK

Show details
STB-37/2 KIT-CL
STB-37/2 KIT-CL

Kit, Two STB-37’s, Y Cable, 1′ SNAP-TRACK, DIN Rail Clips

Show details
STB-120CH
STB-120CH

120 DIO Screw Terminal Board

Show details
STB-48CH
STB-48CH

48 DIO Screw Terminal Board

Show details
STB-72CH
STB-72CH

72 DIO Screw Terminal Board

Show details
STB-96CH
STB-96CH

96 DIO Screw Terminal Board

Show details

Cables

ModelDescription
ZTR-XX

“Zippertubing” shielded protective jacket for ribbon cable (XX = length in feet)

Show details
PTRC-CAB6

Spare 2-meter cable for PTRC-AT

Show details
CAB78-37/2
CAB78-37/2

CAB78-37/2 Cable is a 6′ round-wire “Y” cable for use with the PCI-IIRO-16 and the PCI-IDIO-16 which connects to the DB-78 connector on these card’s mounting brackets and terminated in two DB-37 female connectors.

Show details
CAB68-36

CAB68-36 Cable is a 3′ round-wire cable for use with the PCI-DIO-48JPL(S) for elegant OEM solutions. The cable is available with either one-touch lock latches (CAB68-36L), or jack screws (CAB68-36J).

Show details
CAB50F-1.00
CAB50F-1.00

1.00″ 50-pin F-F Cable

Show details
CAB50F-1.75
CAB50F-1.75

1.75″ 50-pin F-F Cable

Show details
CAB50F-10
CAB50F-10

10’ 50-pin F-F Cable

Show details
CAB50F-2
CAB50F-2

2’ 50-pin F-F Cable

Show details
CAB50F-3
CAB50F-3

3’ 50-pin F-F Cable

Show details
CAB50F-4
CAB50F-4

4’ 50-pin F-F Cable

Show details
CAB50F-6
CAB50F-6

6’ 50-pin F-F Cable

Show details
CAB50F-8
CAB50F-8

8’ 50-pin F-F Cable

Show details
CAB50-xx
CAB50-xx

Ribbon Cables – CAB50-6 is designed for use with the A16A and A24A, and has a 50-pin female header on one end, and a card-edge socket on the other.

Show details
CAB50-3-SCSI

Three foot 50-pin SCSI round wire cable

Show details
CAB37YS-4

Split cable assembly for use when two CA37’s are used

Show details
CAB37-120
CAB37-120

120″ DB37 F-F cable

Show details
CAB37-30
CAB37-30

30″ DB37 F-F cable

Show details
CAB37-5
CAB37-5

5″ DB37 F-F cable

Show details
CAB37-60
CAB37-60

60″ DB37 F-F cable

Show details
CAB37-72
CAB37-72

72″ DB37 F-F cable

Show details
CAB37-18
CAB37-18

18″ DB37 F-F cable

Show details
CAB37-36
CAB37-36

36″ DB37 F-F cable

Show details
CAB37-48
CAB37-48

48″ DB37 F-F cable

Show details
CAB37-18Y

“Y” Cable for connecting two AIM-16 Analog Input Multiplexers to an A/D Card.

Show details
CAB100-6-SCSI

Six foot 100-pin SCSI round wire cable

Show details
CAB-COM-8S

Breakout Cable for PCI-COM485/8 Serial Communication Card. Normally it is included when purchasing the card, but it is also separately available.

Show details
CA37-2

As above except for use with a second set of AIM-16P’s

Show details
CA37-1

Cable adapter used to connect P/N AIM-16P to a variety of ACCES A/D boards

Show details
C68PS18L
C68PS18L

The C68PS18L 68-Pin SCSI 18″ round-wire shielded cable is used to connect our STB-68 screw terminal board to the USB-AIO and Fast USB-DIO Series modules.

Show details
C68MM-1.85
C68MM-1.85

68-pin male to male SCSI ribbon cable, 1.85 inches long. Used to connect our STB-68 screw terminal board with the USB-AIO and Fast USB-DIO Series modules.

Show details
C68MM-1.00
C68MM-1.00

68-pin male to male SCSI ribbon cable, 1.00 inches long. Used to connect our STB-68 screw terminal board with OEM versions of the USB-AIO and Fast USB-DIO Series boards.

Show details
C34FF(XX)DF3

34 pin ribbon cable to DB37 female. (XX) is length in inches: 7, 15, 30 or 36.

Show details
C104-D37M/D9M
C104-D37M/D9M

3′ round-wire external serial breakout cable provides four male DB9 connectors from a male DB37 connector. Useful for system cabling and can be mated with the C104-40F/D37F cable for various PC/104 serial requirements.

Show details
C104-50F-D9M8

50 pin ribbon cable with female header to eight DB9M connectors, 12″ long

Show details
C104-50F-D9M4

50 pin ribbon cable with female header to four DB9M connectors, 12″ long

Show details
C104-50F-D25M

50 pin ribbon cable with female header to 2 DB25M connectors, 12″ long

Show details
C104-40F/D37F

Ribbon cable, 40 Pin Female to DB37 Female

Show details
C104-40F-D9M

40 pin ribbon cable with female header to 4 DB9M connectors, 12″ long

Show details

Signal Conditioning Accessories

ModelDescription
LVDT-8U – 8

8 Channel LVDT / RVDT Signal Conditioner

Show details
IIB-24

Digital signal-conditioner – converts 24 TTL inputs into optically isolated inputs
(allows reading 3 to 31VDC or VAC signals with any standard TTL digital input port)

Show details
AIM-16P
AIM-16P

16 Channel Input Module with External Power

Show details
AIM-16
AIM-16

16 Channel Input Module

Show details
AIM-16I
AIM-16I

16 Channel Input Module with Current-Inputs

Show details
AIM-16M
AIM-16M

16 Channel Input Module with Manual-Gain Only

Show details
AIM-16R
AIM-16R

16 Channel Input Module with RTD Optimized

Show details
A4T
A4T

Module Adapter Board, Terminal Connectors, 4 Module Locations

Show details
A16A
A16A

Module Adapter Board, Edge Connector, 16 Module Locations

Show details
A24A
A24A

Module Adapter Board, Edge Connector, 24 Module Locations

Show details
A24H
A24H

Module Adapter Board, Header Connector, 24 Module Locations

Show details