LVDT-8U 8-Port LVDT/RVDT Excitation, Signal Conditioning Board

ACCES: Committed to Service

We're here to help!

Let our amazing support staff help you with questions: whether finding the right model for you, or technical support on using the product - or figuring out what's wrong - we have the expertise to help you. Use it!

Call, E-Mail, or Chat, Today!

Features

  • Eight or Four channels of AC LVDT conditioning
  • Full-bridge and Half-bridge LVDTs supported
  • Offset and wide-range gain calibration pots
  • Removable screw terminal blocks for easy connection and serviceability
  • Use easily with PLC or PC-based Data Acquisition
  • Non-multiplexed, simultaneous conditioned outputs
  • Compatible with other ACCES A/D products for use in legacy systems using DB37M connector
  • Jumper selected LED display utility for quick and easy operating verification of connected LVDTs
  • Factory oscillator frequency of 10kHz
  • Master / Slave excitation frequency synchronization
  • Onboard DC/DC converter with reverse power protection operates on a single 12VDC external source
  • Designed, made, supported, and manufactured in the USA
Last updated on November 2, 2023, 6:30 pm

$295.00$1,229.00

In Stock

Description

LVDT / RVDT Excitation, Signal Conditioning Board

The LVDT-8U signal conditioning board was designed to improve upon the advances made with the release of our LVDT-8A model.

The LVDT-4U and LVDT-1U are 4-port and 1-port versions of the same product.

Half-bridge LVDTs requiring high-gain and a wide offset adjustment are now supported, as well as the inclusion of one master channel for frequency generation, which all other channels are synchronized to. This eliminates beat frequencies when sampling the outputs with a fast A/D, providing more reliable and accurate data.

The board supplies excitation and the corresponding conditioning of the outputs for up to eight independent LVDT transducers simultaneously. Those outputs are then readily available via removable screw terminals for introduction to a data acquisition or measurement circuit such as an analog to digital converter or simply by using a display meter.

It also has an LED display utility for quick and easy checkout of the sensors and signal conditioner operation. Jumper select the channel of interest and observe the output voltage level as +10V, +5V, ZERO, -5V or -10V. This inherently makes the product more serviceable and vastly more user friendly.

LVDT and SYSTEM VARIATIONS

Certain LVDT sensor specifications affect the way the LVDT-8U board will be configured for your application, so please have this information available when placing your order.

  • Model Number of LVDT (a second set of eyes always helps to verify the specifications)
  • Configuration / Number of wires (full-bridge / 4 wires or half-bridge / 3 wires)
  • Displacement / Travel (usually specified in mm or mils if not in metric)
  • Displacement / Travel of interest (this is often less distance than the LVDT is capable of)
  • Output Span / Sensitivity (usually specified in mV/V/mils)
  • Excitation Voltage (such as 2.5Vrms nominal)
  • Excitation Frequency (such as 4.8kHz +/-8%)
  • Desired Output Signal Level (such as +/-1V to +/-14V)
  • Desired Bandwidth (the rate at what the LVDT probe tip will be moving)

ACCESSORIES

Accessories include an assortment of 37-pin ribbon cables for connecting the conditioned outputs to a variety of readily available analog to digital converter products. ACCES offers a broad range of A/D products using USB, RS-485, PCI, PC/104, Ethernet, 900MHz/2.4GHz wireless, and even ISA bus types. For high-channel count applications our multiplexer accessory allows up to eight LVDT-8U boards to be connected to one 8-channel A/D board.

No software is necessary to start using the LVDT-8U. A user friendly setup program and user manual is included with each shipment. The setup program can be used to help with the selection of application specific options and the user manual contains full details on the boards operation.

Downloads

Data Sheets

Manuals

Software

Transducers Served

  • LVDT, RVDT, LVRT with primary impedances of 150 Ohms or more

Signal Conditioner

  • AD698AP

Excitation Frequency

  • 10kHz standard
  • The frequencies may be anywhere in the range of 20Hz to 20kHz however this is a factory installed option which should be specified at the time of purchase. Frequencies may also be different for each LVDT channel.

Power Required

  • +24 (18 to 36) VDC at 350 mA maximum

Options Include

  • +12 (9 to 18) VDC at 700 mA maximum
  • +48 (36 to 75) VDC at 175 mA maximum
  • External power supply: ±12VDC or ±15VDC at ±300 mA maximum

Output Analog Voltage

  • ±5VDC to ±10VDC

Environmental Operating Temperature

  • 0°C to 65°C

Storage Temperature

  • -40°C to +100°C

Humidity

  • 0 to 90%, non-condensing

Size (LVDT-8U and LVDT-4U boards)

  • 8.0″ long (203 mm) X 4.75″ wide (120 mm) X 0.75″ high (19 mm)

Size (RT-BOX)

  • 8.5″ long (216 mm) X 5.25″ wide (133 mm) X 2.375″ high (60 mm)

To get your custom configuration, please fill in our helpful LVDT-8U Configuration Request Form and email it to your Sales Engineer.
If you don’t have a contact yet, please reach out to us at Contact Sales.

ModelDescriptionPrice (USD)
LVDT-1U

1 Channel LVDT / RVDT Signal Conditioner

$295.00
LVTD-4U

4 Channel LVDT / RVDT Signal Conditioner

$595.00
LVDT-8U

8 Channel LVDT / RVDT Signal Conditioner

$1,229.00