Yes
Showing 76–90 of 106 results
-
Digital I/O
PCIe-DIO-24HC: PCI Express Digital I/O Card with Counters and IRQ
Features
- x1 lane PCI Express Digital I/O board
- 24 high-current DIO lines
- Three 82C54 Counter/Timers
- IRQ generation from Port C bit 3, an external source, and Counter A2, configurable for edge- or level- triggered
- DIO lines buffered
- Four and eight bit ports independently selectable for inputs or outputs
- User configurable 10k ohm Pull-up/Pull-down resistors on DIO lines
- Jumper selectable VCCIO (5V, 3.3V)
- VCCIO voltage available to the user via 0.5A resettable fuse
- Latching 50 pin male header on card mounting bracket for secure cable retention
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40° to +85°C)
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$329.00 Add To Quote -
Digital I/O
PCIe-DIO-24HS PCI Express Digital I/O Card w/CoS IRQ
Features
- x1 lane PCI Express digital I/O board
- 24 high-current DIO lines
- IRQ generation from Port C bit 3, and Counter A2 (“C” models) and/or Change-of-State (COS) Detection (“S” models)
- DIO lines buffered
- Four and eight bit ports independently selectable for inputs or outputs
- User configurable 10k ohm Pull-up/Pull-down resistors on DIO lines
- Jumper selectable VCCIO (5V, 3.3V)
- VCCIO voltage available to the user via 0.5A resettable fuse
- Latching 50 pin connector
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40° to +85°C)
- Quick-disconnect tab on mounting bracket for wiring harness or cable shield ground (with non-latching 50 pin connector)
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$209.00 – $239.00 Add To Quote -
Digital I/O
PCIe-DIO-48JPLS Digital I/O Card
Features
- 48 or 24 channel high-current TTL digital I/O lines
- Change of State (COS) detection and interrupt capabilities
- Compatible with industry standard 8255 PPI
- 68-pin SCSI pin-in-socket female connector on card mounting bracket
- User interrupt pin
- All 48 digital I/O lines buffered with 32mA source / 64mA sink
- Four and eight bit ports independently selectable for inputs or outputs
- Jumper configurable pull-ups/-downs on DIO lines
- 5V or 3.3V VCCIO configurable by jumper selection
- Poly-fused VCCIO available to the user on each I/O header
- Easy upgrade from PCI-DIO-48JPLS Family devices
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Non-latching connector
- Card without Change-of-State IRQ feature
- RoHS compliant version
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$378.00 – $454.00 Add To Quote -
Digital I/O
PCIe-DIO-48S/48/24S: Digital I/O w/CoS IRQ PCI Express Card Family
Features
- 48 or 24 channel high-current TTL digital I/O lines
- Change of State (COS) detection and interrupt capabilities
- Compatible with industry standard 8255 PPI
- Two 50-pin male headers with 24 digital lines each
- User interrupt pin on each DIO connector
- All 48 digital I/O lines buffered with 32mA source / 64mA sink current capabilities
- Four and eight bit ports independently selectable for inputs or outputs
- Pull-ups on DIO lines (optional pull-down)
- 5V VCCIO (3.3V optional)
- VCCIO available to the user on each I/O header
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- Easy upgrade from PCI-DIO-48S
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 3.3V VCCIO (LVTTL)
- Molex PC-style connector for maximum 5V VCCIO current sourcing capability
- RoHS compliant version
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$279.00 – $379.00 Add To Quote -
Serial Communication
PCIe-ICM-4SM Multiprotocol Serial Card Family
Features
- 4 and 2-port PCI Express serial communication cards with DB9M connectivity
- 1.7kV isolation port-to-port and port to computer on ALL signals
- Serial protocol (RS-232/422/485) SOFTWARE CONFIGURED per port, stored in EEPROM for auto-configure at next boot
- High performance 16C950 class UARTs with 128-byte FIFO for each transmit and receive buffer
- Supports data communication speeds up to 3Mbps (RS-232 up to 921.6 kbps)
- Virtually any custom baud rate may be configured by the user via register settings, no custom oscillator needed
- ±15kV ESD protection on all signal pins
- 9-bit data mode and RS-485 full-duplex (4-wire) fully supported
- Full modem control signals in RS-232 mode
- Software compatible with all operating systems
- Selectable termination for RS422 or RS-485 applications
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- High-speed RS-232 version up to 921.6kbps
- Extended temperature operation (-40°C to +85°C)
- RS-422/485 only versions
- Remote Wake-Up Enable
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$299.00 – $529.00 Add To Quote -
Digital I/O
PCIe-IDIO-24 Isolated Digital I/O Card Family
Features
- 24 optically isolated, non-polarized digital inputs
- Software configurable filters on inputs for electrically noisy environments
- Can detect input state change and assert interrupt
- 24 optically isolated high-side FET switches
- Opto-couplers rated for 2.5kV isolation
- Four optically isolated output groups and two optically isolated input groups
- 8 non-isolated TTL/CMOS I/O lines
- Designed, made, supported, and manufactured in the USA
Factory Options
- Extended temperature operation (-40°C to +85°C)
- 12-channel version (with 4 TTL I/O) available
- Input only and output only versions available
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$289.00 – $439.00 Add To Quote -
Digital I/O
PCIe-IIRO-16 PCIe Isolated Input Relay Card with COS
Features
- 16 optically isolated, non-polarized digital inputs
- Switchable filters on inputs for electrically noisy environments
- Optically isolated channel to channel and channel to ground
- Can detect input state change and assert interrupt
- 16 electro-mechanical relay outputs
- Automatically detected under Windows
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40° to +85°C)
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$419.00 Add To Quote -
Digital I/O
PCIe-IIRO-8 PCI Express Isolated Relay I/O Card
Features
- Eight optically isolated, non-polarized digital inputs
- Switchable filters on inputs for electrically noisy environments
- Eight electro-mechanical relay outputs
- Optically isolated channel to channel and channel to ground
- Can detect input state change and assert interrupt
- Automatically detected under Windows
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40° to +85°C)
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$329.00 Add To Quote -
USB
USBP-DIO16RO8 USB, Pico-I/O™ Sized Digital I/O and Relay Board Family
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 16-channel TTL/LVTTL digital I/O
- All 16 I/O lines buffered with 32mA sink/source current capabilities
- 8 Form C electromechanical relays switch 1A
- Custom high-speed function driver
- Alternate embedded USB connector
- All required power drawn from USB port, no external power adapter required
- Pico-I/O™ module size (60mm x 72mm) & mounting capability
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature (-40°C to +85°C) operation
(0 reviews)$139.00 – $239.00 Add To Quote -
USB
USB-232-IND, USB-422-IND, USB-485-IND, USB-422-485-IND
FEATURES
- RoHS compliant, single-port serial communications adapter for USB 2.0 or 3.0
- Add a RS-232, RS-422 or RS485 serial port to any USB equipped computer
- Compact, industrial, military-grade metal backshell
- Industrial operating temperature (-40°C to +85°C) standard
- Includes type FT232R UART with 128-byte receive/256-byte transmit FIFO buffers
- Supports 7 or 8 data bits, 1 or 2 stop bits, and odd /even / mark / space / no parity
- ±15kV ESD Protection (IEC 6100) on all RS-232/422/485 signals protects against spikes and ground loops
- Fully shielded cable protects data from EMI and RF interference
- Software programmable baud-rates
- All required power drawn from host USB port, no external power adapter required
- Supported for use in Windows (including Windows CE) and Linux operating systems
- Designed, made, supported, and manufactured in the USA
USB-232-IND
- Supports all RS-232 signals, including handshaking
- Data transfer speeds up to 1Mbps asynchronous
USB-422-IND
- Supports full-duplex (4-wire) RS-422 protocol
- Data transfer speeds up to 3Mbps asynchronous
USB-485-IND
- Supports multi-drop (2-wire, half-duplex) RS-485 protocol
- Data transfer speeds up to 3Mbps asynchronous
USB-422-485-IND
- Supports full-duplex RS-422/485 protocol
- Supports 4-wire RS-485 protocol
- Data transfer speeds up to 3Mbps asynchronous
- Pinout compatible with legacy model USB-485
FACTORY OPTIONS
- Removal of RC Termination from receiver lines (RS-422 and RS-485 models)
- To fully comply with IEC60945 and IACS E10, the factory option Halogen Free Flame retardant (HFFR) cable is required
(0 reviews)$98.00 – $119.00 Add To Quote -
Analog Input
USB-AI16-2A Dual Channel 16-Bit 2MS/Second Simultaneous Analog/Digital Input Board
FEATURES
- High-speed USB 2.0 device, USB 3.0 compatible
- Two 1MHz 16-bit A/D converters for 2MHz aggregate sampling rate
- Analog and digital inputs acquired simultaneously, with timestamping
- 16 kSample FIFO (shared by all inputs)
- Per channel software selectable ranges of 0-1V, 0-2V, 0-5V, 0-10V, ±1V, ±2V, ±5V, ±10V
- Eight digital I/O’s (four inputs & four high-current outputs)
- High retention USB type B connector for vibration-proof, worry-free communications
- Alternate USB micro-fit header can be used to reduce board footprint in embedded applications
- Small rugged steel industrial enclosure
FACTORY OPTIONS
- OEM version (board only) features PC/104 module size and mounting compatibility
- Extended temperature (-40° to +85°C)
- External power
- Screw terminals for power input provide high retention connection
- LVTTL DIO lines
- RoHS compliant product
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$595.00 Add To Quote -
USB
USB-AIO16-16F-OEM Family
FEATURES
- High-speed USB 2.0 multifunction DAQ
- Sustained sampling speeds up to 1MHz
- 16-bit or 12-bit resolution A/D converter
- Flexible, software configured functionality
- 16 single-ended or 8 differential analog inputs
- 8 input ranges, 4 unipolar and 4 bipolar, channel-by-channel programmable
- Autocalibration and oversampling for real-time accurate data
- A/D starts via software, timer, or external trigger
- Two 16-bit analog outputs; 4kHz update rate
- 16 high-current digital I/O lines
- Alternate micro-fit embedded USB header connector
- USB/104 form-factor for OEM embedded applications
- Small, (4″ x 4″ x 1.25″) rugged industrial enclosure
- All required power drawn from USB port, no external power adapter required
- Type B USB connector features industrial strength and high-retention design
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Pseudo-differential analog inputs
- Four 16-bit analog outputs; 4kHz update rate
- External power for high current capabilities
- Screw terminals for power input provide high retention connection
- Industrial operating temperature (-40°C to +85°C)
- OEM (board only) version for embedded applications
- Single-ended current inputs (4-20mA or 10-50mA)
- Voltage dividers per input
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$349.00 – $854.00 Add To Quote -
USB
USB-AIO16-16F: 16 Channel, Multifunction Analog Input/Output USB Module Family
FEATURES
- High-speed USB 2.0 multifunction DAQ
- Sustained sampling speeds up to 1MHz
- 16-bit or 12-bit resolution A/D converter
- Flexible, software configured functionality
- 16 single-ended or 8 differential analog inputs
- 8 input ranges, 4 unipolar and 4 bipolar, channel-by-channel programmable
- Autocalibration and oversampling for real-time accurate data
- A/D starts via software, timer, or external trigger
- Two or four 16-bit analog outputs; 4kHz update rate
- 16 high-current digital I/O lines
- Alternate micro-fit embedded USB header connector
- USB/104 form-factor for OEM embedded applications
- Small, (4″ x 4″ x 1.25″) rugged industrial enclosure
- All required power drawn from USB port, no external power adapter required
- Industrial strength and high-retention Type B USB connector
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Pseudo-differential analog inputs
- External power for high current capabilities
- Screw terminals for power input provide high retention connection
- Industrial operating temperature (-40°C to +85°C)
- OEM (board only) version for embedded applications
- Single-ended current inputs (4-20mA or 10-50mA)
- Voltage dividers per input
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$419.00 – $924.00 Add To Quote -
USB
USB-AIO16-64MA-OEM Multifunction 64-Channel Economy Analog I/O USB Family
Features
- High-speed USB 2.0 multifunction DAQ, USB 3.0 and 1.1 compatible
- Sustained sampling speeds up to 500kHz
- 12 or 16-bit resolution A/D converter
- Flexible, software configured functionality
- 64 single-ended or 32 differential analog inputs
- 8 input ranges, 4 unipolar and 4 bipolar, per 4-channel programmable
- Autocalibration and oversampling for real-time accurate data
- A/D starts via software, timer, or external trigger
- 2 16-bit analog outputs available
- 16 high-current digital I/O lines
- 16-bit programmable counter/timer
- I/O connections made via DB37 and DB25 connectors
- Alternate micro-fit embedded USB header connector
- USB/104 form-factor for OEM embedded applications
- PC/104 module size (3.550″ by 3.775″) and mounting compatibility
- All required power drawn from USB port, no external power adapter required
- Type B USB connector features industrial strength and high-retention design
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to + 85°C)
- Reference junction sensor with two 37-pin terminal blocks
- RoHS compliant version available. Please contact us for ordering information
- Enclosed version, DAQ-PACK-M (DPK) features mounting compatibility, and can be found on the DPK-AIO16-64MA page
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$619.00 – $1,008.00 Add To Quote -
Analog Output
USB-AO-ARB1: 8MHz 16-bit Analog Waveform Output USB Board
FEATURES
- High-Speed USB 2.0 Device (USB 3.0+ Compatible)
- High-Retention USB Connector
- Fast Waveform Output; Up to 8M Samples/Sec
- Small, Portable Digital to Analog Single-Ended Output at 16-Bit Resolution
- 16K Sample FIFO Buffer On-Board
- Jumper Selectable Analog Output Ranges of:
0-2.5V, 0-5V, 0-10V, ±2.5V, ±5V, ±10V - Two 4-Bit I/O Ports Independently Selectable for Inputs or Outputs
- All 8 DIO Lines Buffered with Sink 32mA / Source 32mA Current Capabilities
- Jumper Selectable 10KΩ Pull-Up/Pull-Down Resistors on DIO Lines
- Standard 16-Pin IDC Connector for DIO and Gate
- BNC Connectors for DAC Output and Gate Control
- PC/104 Module Size and Mounting Compatibility
- Alternate Embedded USB Connector
- Small, Rugged, Industrial Enclosure
FACTORY OPTIONS
- Board only, without enclosure, features PC/104 module size and mounting compatibility
- Extended Temperature (-40°C to 85°C)
- +5VDC regulated AC/DC supply and onboard DC-power input jack
- Screw terminals installed for DC-power input (no jack, no wall-wart)
- Replace +5VDC digital logic with +3.3V I/O
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$395.00 Add To Quote