WM-XX-DP-ZZZ
Features
- Wireless serial data transfer to any equipment with a serial port
- NEMA4 enclosure for harsh atmospheric, industrial, or marine environments
- Seamlessly and transparently integrate ACCES Wireless Modem into existing interfaces
- RS-232 or RS-422/485 interface options on the Base Station Assembly
- Distances up to 7 miles with the standard Dipole Antenna
- Designed, made, supported, and manufactured in the USA
$350.00
In StockDescription
The Wireless Modem unit can provide a radio communication link between any two pieces of equipment via a serial port. These units can be configured in a number of ways including 900MHz or 2.4GHz modules as a stand base station or integrated into our REMOTE Data Acquisition Pods.
APPLICATIONS
- Factory Automation
- Building Management and Control
- Agricultural and Irrigation Systems
- Security
- Water and Sewage
- Marinas and Ports
- Lighting
- Traffic and Mobile
Modified-COTS (MCOTS) Customization
ACCES can tailor any standard product to your precise requirements — electrical, mechanical, firmware, environmental, or connector-level. Common MCOTS options include alternate I/O ranges, isolation enhancements, firmware changes, private labeling, conformal coating, extended temperature operation, ruggedized enclosures, and military-grade components. If this product is close but not a perfect fit, our engineering team can deliver a rapid-turn MCOTS variant with minimal NRE and dependable, Made-in-USA quality.
BASE STATION
- External Power: +5 VDC ±5%
- Alternate External Power: +7 VDC to +18V
- Baud Rate: Selectable (see Radio Specifications below)
- Serial Data Format
- 8 Character, No Parity, 1 Stop Bit
- 7 Character, Even Parity, 1 Stop Bit
- 7 Character, Odd Parity, 1 Stop Bit
- 7 Character, No Parity, 2 Stop Bits
- Radio Data Buffers
- 132 Byte Data Input
- 132 Byte Data Output
- Operating Temperature Range: 0 to 60°C
- Storage Temperature RangeL -50 to +120°C
- Humidity: 5% to 95% Non-condensing
900MHz Model
General
- Frequency Range: 902 to 928 MHz, Unlicenced ISM Band
- Type: Frequency Hopping Spread Spectrum Transceiver
- Throughput: 9600 bps, 19200 bps
Performance
- Transmit Output Power: 100mW
- Rx Sensitivity: -110dBm (9600bps), -107dBm (19200bps)
- Range
- Indoor: 600′ to 1500′ (9600bps), 425′ to 1060′ (19200bps)
- Outdoor: 7 miles with dipole, over 20 miles with a high gain antenna (9600bps), 5 miles with dipole, over 14 miles with a high gain antenna (19200bps)
- Interferance Rejection: 70dB at Pager and Cellular Phone Frequencies
Power Requirements
- Supply Voltage: 5 VDC ±0.25V
- Current Consumption
- Nominal: Tx – 150 mA
- Power Down Mode: <1mA
Environmental
- Operating Temperature: 0°C to 65°C
2.4GHz Model
General
- Frequency Range: 2.40 to 2.4835GHz, Unlicenced ISM Band
- Type: Frequency Hopping Spread Spectrum Transceiver
- Throughput: 9600 bps, 19200 bps
Performance
- Transmit Output Power: 50mW
- Rx Sensitivity: -104dBm (9600bps), -101dBm (19200bps)
- Range
- Indoor: 150′ to 375′ (9600bps), 106′ to 265′ (19200bps)
- Outdoor: 1.4 miles with dipole, over 12 miles with a high gain antenna (9600bps), 1 mile with dipole, over 8.5 miles with a high gain antenna (19200bps)
- Interferance Rejection: 70dB at Pager and Cellular Phone Frequencies
Power Requirements
- Supply Voltage: 5 VDC ±0.25V
- Current Consumption
- Nominal: Tx – 150 mA
- Power Down Mode: <1mA
Environmental
- Operating Temperature: 0°C to 65°C
Regulatory Compliance
- This product is in full compliance with CE requirements.
| Model | Description | Price (USD) | |
|---|---|---|---|
| WM-XX-DP-ZZZ | The Wireless Modem unit can provide a radio communication link between any two pieces of equipment via a serial port. These units can be configured in a number of ways including 900MHz or 2.4GHz modules as a stand base station or integrated into our REMOTE Data Acquisition Pods. APPLICATIONS
| $350.00 |