Rugged, Industrial Grade, 4-Port SuperSpeed USB 3.1 Hub with High-Retention USB Connectors and Extended Temperature Operation
The USB3-104-HUB is a high performance, industrial grade, mountable solution for USB expansion. It is a high-speed USB 3.1 device, USB 2.0 and 1.1 compatible. Each of the four downstream ports are capable of SuperSpeed (5Gbps), Hi-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps) data transfers.
This product utilizes a high-performance, low-power USB 3.1 hub controller. It is USB-IF certified, Windows Hardware Quality Lab (WHQL) compliant, and its extended operating temperature is rated for industrial and military grade applications.
The USB3-104-HUB was designed to withstand a variety of environmental conditions such as shock, vibration, and temperature. This hub has latching / locking port connectors on both downstream and upstream ports to prevent accidental disconnects. The small, low profile, steel enclosure allows the device to be installed in numerous locations where multiple USB devices must share a single USB port. The rugged steel enclosure, positive retention connections, and extended temperature (-40°C to +85°C) operation makes the USB3-104-HUB stand out compared to commercially available USB 3.1 hubs.
Each card has light emitting diodes (LEDs) for status indications. A green LED near the upstream USB type B connector indicates power to the board. Each downstream port indicator lights Green, Blue, or Red, to indicate USB2/HighSpeed, USB3/SuperSpeed, or fault, respectively.
The USB3-104-HUB is fully protected from faulty peripherals connected to its downstream ports. Each port utilizes its own power distribution switch that provides overcurrent and short-circuit protection. If a fault occurs, the power distribution switch will disengage the respective port and illuminate its red fault LED. A fault occurring on one downstream port will not affect other devices attached to the USB-104-HUB’s other downstream ports. The disabled port can be re-enabled by clearing the fault and cycling power to the hub.
The USB3-104-HUB supports bus-powered and self-powered applications. Bus-powered mode is a limiting factor as downstream ports take power from the upstream port’s remaining available power. If downstream peripherals require more current, the USB3-104-HUB can be configured in self-powered mode. External +5V can be supplied to the card, which will provide 900mA (1200mA max.) to each downstream port. Power can be brought in via the DC locking jack / plug, or the 2-position screw terminal.
The USB3-104-HUB is designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board itself is PC/104 sized (3.550 x 3.775 inches, 90mm x 96mm) and ships inside a steel powder-coated enclosure with an anti-skid bottom. Mounting provisions available include a DIN rail and various panel mounting plates.
OEM USB/104 FORM FACTOR
The OEM (board only) version is perfect for a variety of embedded applications. What makes the OEM option unique is that the PCB size and pre-drilled mounting holes match the PC/104 form factor (without the bus connections). This ensures easy installation using standard standoffs inside most enclosures or systems. The board can be added to any PC/104-based stack by connecting it to a USB port usually included on-board with embedded CPU form factors. The USB3-104-HUB OEM board can also be installed using standoffs inside other enclosures or systems.
High Retention USB Connectors
The ever-growing presence of USB in the industrial/military marketplace has driven the need for USB connections to be reliable, dependable, and unfailing. Gone are the days of loose USB connections. All type A and type B USB connections used on USB3-104-HUB product feature a high retention, locking design that complies with the class 1, Div II minimum withdrawal requirement. Over 11 pounds of force (50 Newtons), is required to separate the type A connectors. These connectors have a positive locking tab to quickly differentiate it from standard USB connectors. The Type B connection follows the USB3 Vision standard and features a screw lock USB cable to ensure secure connection to the USB3-104-HUB. Using the fastened USB connections on this hub increases reliability in your system and ensures against accidental disconnection.
Available accessories include a wide variety of standard USB cables and mounting provisions for quick and easy-to-use, out of the box, connectivity. Mounting provisions include DIN rail and various panel mounting plates. Also, external instrument-grade power supplies are available.
No driver installation is required for the USB3-104-HUB product. Any USB compliant operating system will automatically install it. It will enumerate as a Generic Hub which uses the USB Hub Class Driver that is built into USB compliant operating systems such as Linux (including Mac OS X) and Windows.
ACCES is proud to provide a full suite of software support with every Data Acquisition product. We are committed to supporting the most popular operating systems and platforms for our customers. Currently we are actively supporting XP -> 10, both 32 & 64 bit, including “Server 2008,” “Embedded,” and “Compact” flavors for all plug-and-play products including PCI, PCI Express, USB, and more. Many products continue to ship with support for additional operating systems such as DOS, Windows 95, 98, Me, NT4, and 2000.
Among the software we deliver with our products are sample programs in a wide variety of programming languages. These samples are used to demonstrate the software interfaces to our products — and many can be used as-is in your production environments, or to test functionality of the devices out-of-the-box. We’re currently actively supporting sample programs in Microsoft Visual C#, Visual Basic, Delphi, and Visual C/C++, with many devices including samples in Borland C/C++ 3.1 for DOS. Additionally we provide National Instruments LabVIEW compatible DLLs and many demonstration VIs for our devices.
Drivers for various operating systems are also provided, including active support for Windows XP -> 10 — all in both 32-bit and 64-bit flavors, and including consumer, server, and embedded varieties — as well as the 2.6 and newer Linux kernels and recent OSX / macOS versions. Many products continue to ship with driver support for Windows 95, 98, Me, NT4, and Windows 2000, but support for these operating systems is considered deprecated.
Setup Programs and Utilites
Our Data Acquisition devices also include a graphical setup utility that walks you through the process of configuring any option jumpers or switches on the device, as well as explaining a little about the various connectors present.
Many devices also include utility programs – little tools to make your use of the device easier, such as EWriter, a program that allows you to read and write data in the user-accessible EEPROM locations on all our USB data acquisitition products; or WinRISC, a “Really Incredibly Simple Communications” terminal program that lets you get started instantly with serial devices.
“Register Level” Documentation
Besides all this software in all these languages and operating systems ACCES has a policy of open and transparent development: none of our lowest-level “register” interfaces are hidden from you — we document every register in every bus card, every command in every serial board, and every usb control transfer in every USB Data Acquisition board. These lowest-level interfaces allow you to develop for our products in ANY operating system or language, regardless of our actively supporting it or having a driver for it. We have customers actively developing in ADA, Android, Python, Java, MATLAB, Solaris, and more, just by referring to our complete low-level interface documentation! And we provide the full source code to all of our drivers, regardless of operating system, to give you an even bigger head start in your own development tasks.
No Fees or Royalties
All of this software is provided at no additional charge, and is licensed under any of a variety of flexible — and royalty free — options. Check out our software license explanation if you’d like more information.
ACCES also offers Custom Software Services for our products. Our prices are unbelievably low, often as inexpensive as free! If you need something tweaked to support your needs, or an entire enterprise application developed from scratch, it is definitely worth your time to inquire with us, first.
Further information about available ACCES Software:
Redistributing Windows Drivers
A list of ACCES drivers and the files that compose them under different versions of Windows, so you can easily redistribute ACCES cards and drivers.
USB 3.1 SuperSpeed, Hi-Speed, Full-Speed, Low-Speed
Super (5Gbps) / Hi (480Mbps) Full (12Mbps) / Low (1.5Mbps)
USB 2.0 Compatible
USB 1.1 Compatible
USB 3.1 vs USB 3.0
USB 3.0 was renamed to “USB 3.1 Gen 1” and operates at up to 5Gbps
USB 3.1 Gen 2 supports 10GGbps
Operating Temperature Range: -40°C to +85°C
Storage Temperature Range: -40°C to +85°C
Humidity: 5% – 95%, non-condensing
Board Dimension: 3.550 x 3.775 inches
Box Dimension: 3.985 x 3.990 x 1.045 inches
284 grams (in enclosure)
65.8 grams (-OEM board only version)
Type A Latching: Retention up to 50 Newtons, Physical shock: Per EIA-364-27 Condition H (11ms 30G), Vibration: Per EIA-364-28D Condition V, Test A
Type B and A: 8 Newtons disconnect non-locking
DC Power Jack (locking)
Vibration: Mil-Std 202G Method 201A
Insulation Resistance: MIL-STD 202G Method 302 Condition B
Thermal Shock: MIL-STD 202G Method 107G
Operating Temperature Rating: -40 °C to +105 °C(-40ºF to +221°F)
DC Power Jack (non-locking): 2.22 Newtons disconnect
No external power required
Optional external power: Connect via screw terminals, a locking DC jack / plug or standard jack / plug
USB 3.1: Up to 480mA at 5VDC required
Bus Powered: Approximately 420mA available from host for downstream ports; typical consumption at idle: 40mA
Externally Powered: 900mA available for each downstream port
USB 2.0: Up to 200mA at 5VDC required
Bus Powered: Approximately 300mA available from host for downstream ports; typical consumption at idle: 40mA
Externally Powered: 900mA available for each downstream port
-WI option: Wide Input power from 7VDC to 28VDC at the DC power jack or screw terminals
The USB 3.1 Gen 1 bus is specified to provide 900mA through the USB cable to most desktop environments.
This gives you 420mA available on 5VDC (900mA – 480mA = 420mA) for any particular application.
If using more than a total of 900mA, or your USB port has less then the 900mA normally provided, remove VUSB jumper and place jumper on VEXT.
You may use two power input options (power jack or screw terminals).
See manual for details.
This product is designed to be in full compliance with CE requirements.
OEM and volume pricing available, please contact us.
4-Port industrial USB 3.1 Hub with latching connectors
4-Port industrial USB 3.1 Hub with non-latching connectors
For the USB3-104-HUB
5VDC, 5A regulated AC/DC external power adapter, with locking connector, $79
Locking DC Power Supply Plug (if using your own power source), $20
6-foot high-quality USB 3.1 cable Male, Locking Type B to Non-locking type A, $50
6-foot high-quality USB 3.1 cable Male, Locking Type B to Locking Type A, $80
For the USB3-104-HUB-E
5VDC, 5A regulated AC/DC external power adapter, $40
6-foot high-quality USB 3.1 cable with non-locking Type A and B ends, $10
For the both versions
Type I Plug Adapter, USA to: AU/NZ/China, $10
Type G Plug Adapter, USA to: UK/Hong Kong, $10
Type C Plug Adapter, USA to: Europe, India, Israel, $10