PCIe-DIO-24HS PCI Express Digital I/O Card w/CoS IRQ

ACCES: Committed to Service

We're here to help!

Let our amazing support staff help you with questions: whether finding the right model for you, or technical support on using the product - or figuring out what's wrong - we have the expertise to help you. Use it!

Call, E-Mail, or Chat, Today!

Features

  • x1 lane PCI Express digital I/O board
  • 24 high-current DIO lines
  • IRQ generation from Port C bit 3, and Counter A2 (“C” models) and/or Change-of-State (COS) Detection (“S” models)
  • “S” models now include Digital Integration Features
    • 8 bits with Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
    • 8 bits with Pulse Train (“generate n pulses”) and PWM generation
  • Four and eight bit ports independently selectable for inputs or outputs
  • User configurable 10k ohm Pull-up/Pull-down resistors on DIO lines
  • Jumper selectable VCCIO (5V, 3.3V)
  • VCCIO voltage available to the user via 0.5A resettable fuse
  • Latching 50 pin connector
  • Designed, made, supported, and manufactured in the USA

FACTORY OPTIONS

  • Extended temperature operation (-40° to +85°C)
  • Quick-disconnect tab on mounting bracket for wiring harness or cable shield ground (with non-latching 50 pin connector)
  • RoHS compliant version
  • Support for Wind River VxWorks (call for ordering information)
Last updated on August 19, 2024, 12:24 pm

$209.00$239.00

In Stock
SKU: N/A Categories: , Tags: ,

Description

This product is a x1 lane PCI Express digital I/O board available in two models. The PCIe-DIO-24H is the basic DIO and the PCI-DIO-24HS features advanced change-of-state (COS) detection capabilities. The card emulates an 8255 compatible chip, providing 24 DIO lines. The DIO lines are grouped into three 8-bit ports: A, B, and C. Each 8-bit port is configured via software to function as either inputs or outputs. Port C can be further broken into two 4-bit nybbles via software and configured as either inputs or outputs.

Each DIO line is buffered and capable of up to 32mA source/sink. The VCCIO logic level is globally configured via jumper selection as 5V or 3.3V. Also, ports A, B, C low nybble, and C high nybble are individually jumper configured as pull-up or pull-down through 10kΩ resistor networks.

The card is half-length with a 4.2 inch seated height. I/O wiring connections for this board are via a male 50 pin right angle connector on the card mounting bracket. A ribbon cable can be used to connect this card to termination panels.

Accessories

Available accessories include a broad range of ribbon cables, screw terminal boards and optically isolated adapters and DIN-rail mounts for a variety of quick and easy connectivity options. Use ribbon cables with a female header on one end and a 50-pin female edge connector on the other to connect with industry standard solid state module racks.

SOFTWARE

The card is supported for use in most operating systems and includes a free DOS, Linux, and Windows XP -> 10, both 32 & 64 bit compatible software package. This package contains sample programs and source code in Visual Basic, Delphi, and Visual C++ for Windows. Also provided is a graphical setup program in Windows. Linux support includes installation files and basic samples for programming from user level via an open source kernel driver. Third party support includes a Windows standard DLL interface usable from the most popular application programs. Embedded OS support includes Windows Xpe, WES7, vxWorks, etc.

Downloads

Data Sheets

Manuals

Software


Drivers and Downloads

Full list of available Downloads: Software Packages, Drivers, Manuals, and other documents

Information about our Free Software packages:

ACCES is proud to provide a full suite of software support with every Data Acquisition product. We are committed to supporting the most popular operating systems and platforms for our customers. Currently we are actively supporting XP -> 10, both 32 & 64 bit, including “Server 2008,” “Embedded,” and “Compact” flavors for all plug-and-play products including PCI, PCI Express, USB, and more. Many products continue to ship with support for additional operating systems such as DOS, Windows 95, 98, Me, NT4, and 2000.

Samples

Among the software we deliver with our products are sample programs in a wide variety of programming languages. These samples are used to demonstrate the software interfaces to our products — and many can be used as-is in your production environments, or to test functionality of the devices out-of-the-box. We’re currently actively supporting sample programs in Microsoft Visual C#, Visual Basic, Delphi, and Visual C/C++, with many devices including samples in Borland C/C++ 3.1 for DOS. Additionally we provide National Instruments LabVIEW compatible DLLs and many demonstration VIs for our devices.

Drivers

Drivers for various operating systems are also provided, including active support for Windows XP -> 10 — all in both 32-bit and 64-bit flavors, and including consumer, server, and embedded varieties — as well as the 2.6 and newer Linux kernels and recent OSX / macOS versions. Many products continue to ship with driver support for Windows 95, 98, Me, NT4, and Windows 2000, but support for these operating systems is considered deprecated.

Setup Programs and Utilites

Our Data Acquisition devices also include a graphical setup utility that walks you through the process of configuring any option jumpers or switches on the device, as well as explaining a little about the various connectors present.

Many devices also include utility programs – little tools to make your use of the device easier, such as EWriter, a program that allows you to read and write data in the user-accessible EEPROM locations on all our USB data acquisitition products; or WinRISC, a “Really Incredibly Simple Communications” terminal program that lets you get started instantly with serial devices.

“Register Level” Documentation

Besides all this software in all these languages and operating systems ACCES has a policy of open and transparent development: none of our lowest-level “register” interfaces are hidden from you — we document every register in every bus card, every command in every serial board, and every usb control transfer in every USB Data Acquisition board. These lowest-level interfaces allow you to develop for our products in ANY operating system or language, regardless of our actively supporting it or having a driver for it. We have customers actively developing in ADA, Android, Python, Java, MATLAB, Solaris, and more, just by referring to our complete low-level interface documentation! And we provide the full source code to all of our drivers, regardless of operating system, to give you an even bigger head start in your own development tasks.

No Fees or Royalties

All of this software is provided at no additional charge, and is licensed under any of a variety of flexible — and royalty free — options. Check out our software license explanation if you’d like more information.


Custom Software

ACCES also offers Custom Software Services for our products. Our prices are unbelievably low, often as inexpensive as free! If you need something tweaked to support your needs, or an entire enterprise application developed from scratch, it is definitely worth your time to inquire with us, first.

Further information about available ACCES Software:

Redistributing Windows Drivers
A list of ACCES drivers and the files that compose them under different versions of Windows, so you can easily redistribute ACCES cards and drivers.


aioWDM.VxWorks

ACCES has successfully partnered with Wind River to bring our entire line of PCI and PCI Express DAQ cards to VxWorks 7!

VxWorks 7 VxBus Gen 2 drivers, with easy-to-use API-libraries, are available for this product, including full source and sample code.

Designed to be compatible with our AIOWDM.dll Windows driver & API, this kernel module adds zero% CPU-cycle overhead to your VxWorks runtimes while allowing the lowest-latency hardware register access possible.

You can find more information about our VxWorks libraries and services on our Wind River Silver Partner page.

Block Diagram

Digital I/O

  • Lines: 24; Ports A, B, and C
  • Type: Emulates 8255 compatible chips
  • Logic Level: VCCIO
  • Pull-up/down: 10k ohm, jumper selectable

Logic Levels

  • 5 Volt
    • Input Low ≤ 1.5V, ≤2µA
    • Input High ≥3.5V, ≤2µA
    • Output Low ≤ 0.55V @ 32mA
    • Output High ≥3.8V @ 32mA
  • 3.3V
    • Input Low ≤ 0.8V, ≤2µA
    • Input High ≥2.0V, ≤2µA
    • Output Low ≤ 0.55V @ 24mA
    • Output High ≥2.4V @ 24mA

Environmental

  • Operating Temperature: 0°C to 70°C, optional -40° to +85°C
  • Storage Temperature: -55°C to +150°C
  • Humidity: 5% to 95% RH, w/o condensation
  • Card Dimensions: Half-Length; Height – 4.2″ seated

Regulatory Compliance

This product is in full compliance with CE requirements.

ModelDescriptionPrice (USD)
PCIe-DIO-24HS

PCIe, 24 DIO, Latching 50 Pin Conn, CoS IRQ

$239.00
PCIe-DIO-24H

PCIe, 24 DIO, Latching 50 Pin Conn

$209.00
Accessories
Direct Connect Terminal Solution
UTBK-50 Direct connect 50-pin removable screw terminal board $49
Cable Connect Solutions
CAB50F-6 50 pin ribbon cable with female header connectors, 6 feet long $30
STB-50 DIN-rail mountable screw terminal board for 37-pin connector $39
STA-50 Configurable screw terminal board for 50-pin connector $79
Isolated and Relay Solutions
IIB-24 24 channel optical isolater board for each 50 pin header $149
ROB-24 24 channel electromechanical relay card for each 50 pin header
ROB-8A 8 channel electromechanical relay card for each 50 pin header
Accessory Enclosure
T-BOX Steel enclosure with powder coated finish, use to mount STB-50 to panel $45
Model Options (call for pricing)
-RoHS RoHS compliant version
-T Extended temperature (-40°C to +85°C)