Description
The M.2-ISOSSI-4 provides four Synchronous Serial Interface (SSI) master ports with an isolated interface for M.2 systems. Each port generates a differential RS-422 clock output and receives differential RS-422 data from an SSI peripheral, such as an absolute encoder.
BiSS-C support can be enabled independently for each port. The I/O signals are brought out through four 6-pin Hirose connectors.
SSI Frame Acquisition
In SSI mode, each port supports programmable clock rates up to 10 MHz and frame lengths from 1 to 64 bits. Clock rate, rising- or falling-edge data sampling, inter-frame delay, and clock idle level are independently programmable. Each sample event generates the configured number of clock pulses and captures one data bit on each selected edge. An inter-frame delay follows each completed frame before another acquisition can begin.
The card captures raw SSI frames. Application software interprets the frame contents according to the connected peripheral’s data format.
Triggering and Optional Synchronization
Acquisition can be initiated by a software command, a periodic timer, or an external trigger. Four external trigger inputs are provided, one per port. A register bit enables shared (global) triggering through Port A’s trigger input. Optional synchronization allows selected ports to be armed simultaneously so their output clocks start on the same sample event.
Data Buffering
In SSI mode, completed frames from each port are transferred to that port’s independent data FIFO as two 32-bit data words containing up to 64 bits of raw SSI data, accompanied by a 32-bit status word. FIFO status and configurable interrupts support data collection by host software.
Applications
- Absolute encoder interfaces
- Motion-control feedback acquisition
- Synchronized position measurement
- Embedded machine control and monitoring
Custom M.2 DAQ Solutions (MCOTS)
As a leading provider of M.2-format DAQ solutions, ACCES supports MCOTS customization of channels, ranges, isolation, sampling behavior, firmware, thermal solutions, and connector changes. If you need a highly integrated M.2 solution tailored to your platform, our engineering team can turn around a modified version quickly.
