ISA Bus / Legacy
Showing 16–30 of 30 results
-
Analog OutputDA-06A ISA Bus Six Channel Analog Output Card with Voltage and Current Outputs
Features
- Six independent analog outputs
- 12-Bit resolution
- Voltage Output Ranges: 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Current Output Ranges: 0-20mA, 4-20mA
- Individual range selection per channel
- Three update modes including simultaneous update
- Additional 24-bit parallel digital input/output port
- Setup and calibration software included
- Designed, made, supported, and manufactured in the USA
Factory Options
- Current Output Ranges: 0-50mA and 10-50mA optional
(0 reviews) -
Analog Output
DA12-8 and DA12-16 ISA Eight and Sixteen Output 12-bit Analog Output Cards
Features
- Eight or Sixteen independent double-buffered analog outputs
- 12-Bit resolution
- Six Voltage Output Ranges: 0-2.5V, 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Individual range selection per channel
- Channel-by-channel or simultaneous update modes
- Outputs held at zero volts at power-up
- Setup and calibration software included
- Designed, made, supported, and manufactured in the USA
(0 reviews) -
ISA
COM-1S and COM-2S
Features
- COM-2S: Two independent, completely configurable, serial ports
- COM-1S: One, completely configurable, serial port
- Supports conventional RS232, High-speed RS-422, and Multi-drop RS-485
- Supports all standard RS-232 lines: TD, RD, RTS, CTS, DCD, DTR, and DI
- Can be wired for 2 or 4 wire RS-422/485 communications
- Supports RS-485 handshaking on-board without special drivers to support Windows and non-DOS programs
- Built-in support for local echo, line termination, and line bias supplies
- Supports extended AT interrupts
- LED status monitors on transmit and receive lines for troubleshooting
- Designed, made, supported, and manufactured in the USA
(0 reviews)$169.00 – $269.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
ISA
ICOM-1S and ICOM-2S
Features
- Completely configurable, asynchronous serial port (ICOM-2S has two ports).
- Opto-Isolated against noisy environments
- Support conventional High-speed RS-422, and Multi-drop RS-485
- Can be wired for 2 or 4 wire RS-422/485 communications
- Support RS-485 handshaking on-board without special drivers to support Windows and non-DOS programs
- Built-in support for local echo, line termination, and line bias supplies
- Supports extended AT interrupts
- LED status monitors on transmit and receive lines for troubleshooting
- Designed, made, supported, and manufactured in the USA
(0 reviews)$214.00 – $283.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
IOD-144 144 Digital I/O ISA Card
Features
- 144 channels of TTL digital I/O lines
- All I/O lines buffered by tristate transceivers. Outputs sink 24mA and source 15mA
- Four- and eight-bit groups independently selectable for I/O
- Pull-up resistors to provide CMOS and contact closure compatibility
- Cable crosstalk suppression by grounds on all even-numbered conductors
- 50-pin connector for compatibility with Western Reserve Controls, Opto-22, Gordos, Potter and Brumfield, etc.
- External interrupts
- Designed, made, supported, and manufactured in the USA
(0 reviews) -
Analog Input
LPCI-A16-16A, DISCONTINUED High-Speed, Universal PCI, 16-bit Multifunction Analog I/O Board
Features
- This product has been discontinued.
- Great News!
ACCES has designed the replacement for this discontinued product.
Just a click away to the LPCI-AIO16A. - 500kHz sampling rate
- 16 single-ended or 8 differential inputs, unipolar or bipolar
- Auto calibration and oversampling for accurate data
- Unique channel-by-channel programmable gain feature
- 1024 sample data FIFO for A/D (optional up to 64k samples)
- Two 12-bit D/A outputs and 16 digital I/O lines
- Software selectable synchronous, asynchronous and timed trigger modes
- 11 software/hardware selectable ranges of: 0-1V, 0-2V, 0-4V, 0-5V, 0-10V, ±0.5V, ±1V, ±2V, ±2.5V, ±5V, ±10V
- Meets Universal PCI and MD2 Low Profile PCI Bus Specification (Call for PCI-Express availability)
- Designed, made, supported, and manufactured in the USA
Factory Options
- FIFO up to 64k samples
- Factory input range / gain of 1-100
(0 reviews) -
-
Analog Input
RDAG12-8(H) Remote Analog Output Digital I/O Pod
Features
- Remote intelligent analog output and digital I/O units with opto-isolated RS-485 serial interface to host computer
- Eight 12-bit analog current (4-20mA) and voltage outputs
- Software selectable voltage ranges of 0-5V, 0-10V, ±5V
- Seven bits of digital I/O configured on a bit-by-bit basis as either inputs or high-current outputs.
- Field connections accomplished via 50-pin removable screw terminals.
- Onboard 16-bit 8031 compatible microcontroller with 32K SRAM and EEPROM
- Watchdog circuit for reset on power-up and microprocessor failure
- Protective metal T-Box for high-power model (RDAG12-8H)
- Protective NEMA4 enclosure for harsh atmospheric and marine environments (RDAG12-8 only)
- High-Power Model can drive loads up to 250mA per channel
- Designed, made, supported, and manufactured in the USA
(0 reviews)$585.00 – $710.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog Output
USB-DA12-8: 8-Channel, 12-Bit Analog Waveform Output USB Module
Features
- High-speed USB 2.0 device
- Up to 125K conversions per DAC per second
- Streaming waveform data at over 400,000 DAC outputs per second total
- 128K Sample buffer on-board, or Infinitely long streaming waveforms!
- Buffered waveforms at up to 1 million DAC conversions per second total
- ILDA compatible
- Small, portable 8-channel, 12-bit, digital to analog outputs
- Double-buffered allowing simultaneous update of all DACs
- Analog output ranges of 0-2.5V, 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Single-ended and differential outputs on separate connectors
- PC/104 module size and mounting compatibility
- Rugged small-sized (4″ x 4″ x 1.25″) steel enclosure
- Type B USB connector features industrial strength and high-retention design
- Designed, made, supported, and manufactured in the USA
Factory Options
- Resistors in series with differential connector for impedance matching
- DIN rail mounting provision
- Economy ‘E’ version available without screw terminal board
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$399.00 – $629.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Watchdog
WDG-2S
FEATURES
- Watchdog timer to monitor computer systems
- Two Optically-Isolated RS-422/485 Serial Communication Ports
- Computer power supply voltage and temperature monitors
- LED status monitors on transmit and receive lines for troubleshooting
- Spare 16-bit counter timer
- Designed, made, supported, and manufactured in the USA
(0 reviews) -
Watchdog
WDG-CSM ISA Watchdog Card
FEATURES
- Watchdog timer to detect computer malfunction
- Optional computer power supply monitor
- Optional internal computer temperature monitor
- Optional measurement of computer internal temperature
- Optional fan-failure detection, watchdog time-out buzzer, and opto-isolated reset output
- Designed, made, supported, and manufactured in the USA
(0 reviews)$219.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Watchdog
WDG-SIO
Features
- Watchdog timer to monitor computer systems
- Opto-Isolated RS-422/485 Serial Communications port
- Supports conventional High-speed RS-422, and Multi-drop RS-485
- Can be wired for 2 or 4 wire RS-422/485 communications
- Supports RS-485 handshaking on-board without special drivers to support Windows and non-DOS programs
- Built-in support for local echo, line termination, and line bias supplies
- Watchdog temperature alarm
-
LED status monitors on transmit and receive lines for troubleshooting
- Designed, made, supported, and manufactured in the USA
(0 reviews) -
Relays
WM-IIRO-8 DISCONTINUED Wireless Isolated input, Relay Output Module
Features
- 8 Optically-Isolated, Non-Polarized Digital Inputs with Change-of-State Detection
- 8 Form C SPDT Electromechanical Relays Can Switch Up to 1 Amp Each
- Relays Can be Configured for Level or Pulse Modes
- Microcontroller with SRAM and EEPROM
- Built-in Watchdog Timer
- NEMA4 Enclosure for Harsh Atmospheric, Industrial, or Marine Environments
- Ability to Program with Custom Firmware over Wireless Connection
- 900MHz Wireless Connection (up to 7 miles line-of-sight)
- RS-232 (or RS-485) Serial Interface to Host Computer
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- OEM Version without NEMA4 Enclosure
- Optional Input Only and Relay Only Versions
- 32K Expanded Memory Version
- Custom Firmware for Local Programs & Intelligence
(0 reviews) -
Wireless
WM-XX-DP-ZZZ
Features
- Wireless serial data transfer to any equipment with a serial port
- NEMA4 enclosure for harsh atmospheric, industrial, or marine environments
- Seamlessly and transparently integrate ACCES Wireless Modem into existing interfaces
- RS-232 or RS-422/485 interface options on the Base Station Assembly
- Distances up to 7 miles with the standard Dipole Antenna
- Designed, made, supported, and manufactured in the USA
(0 reviews) -
Digital I/O
WWP-IIRO-8 DISCONTINUED Wireless Isolated Input, Form C Output Module Pair
Features
- DISCONTINUED
- Wireless digital input / relay output module pair
- No software or PC connection is required
- 8 optically-isolated, non-polarized digital inputs
- 8 Form C SPDT electromechanical relays can switch up to 1 Amp each
- Each input on one unit is mapped to automatically control the corresponding relay in the other
- NEMA4 enclosure for harsh atmospheric, industrial, or marine environments
- 900MHz wireless connection
- 4 mile line-of-sight communication
- Internal removable screw terminals for simplified wiring
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- OEM versions available with custom firmware or without NEMA4 enclosure
- 2.4GHz wireless connection
- Optional input only and relay only versions
- High-gain antenna
- 1000mW output radio for up to 20 miles line-of-site range
(0 reviews)$995.00 Add To Quote This product has multiple variants. The options may be chosen on the product page
