Search results: “PCI-IDO-xxA Series” – Page 4
Showing 31–40 of 47 results
-
Screw Terminals
STB-68 Terminal Board and KIT
Features
- 68 pin screw terminal board
- 68 position SCSI high density latching connector
- Silk screen labeling clearly identifies terminal to corresponding pin number
- Small PC/104 and USB/104-size footprint (3.775″ X 3.550″)
- Mount to board, DIN-Rail, enclosure, panel, or plate
- Shielded round-wire and ribbon mating cables available
- Screw terminals accept 26 to 16 AWG wire
- The KIT version is used for mounting the STB-68 to both the USB-AI and Fast USB-DIO Series of USB products.
Includes the STB-68, cable, and specialized mounting hardware.
(0 reviews)$69.00 – $99.00 Add To Quote -
Screw Terminals
UTBK-34
34-pin screw terminal connector for use with the 104-QUAD Series of PC/104 boards
(0 reviews)Call Add To Quote -
Screw Terminals
UTBK-50
Features
- Direct connect
- Universal 50-pin removable screw terminal board for use with USB-DIO-32, USB-DIO-32I, and USB-CTR-15 USB products
- Can also be used with the 104-AIM-32 and 104-COM-8S Series PC/104 boards
(0 reviews)$49.00 Add To Quote -
Serial Communication
104I-COM-8SM PCI/104 Multiprotocol Serial Board
Features
- 8, 4, and 2-port PCI-104 serial communication boards
- High performance octal PCI UART
- Field selectable RS-232, RS-422, and RS-485 protocols, jumper configured per port
- Speeds up to 1.8432Mbps in RS-422/485 modes (RS-232 up to 921.6 kbps)
- 16550 compatible register set with 64-byte FIFO for each TX and RX
- ±15kV ESD protection on all RS-232 signal pins
- Full modem control signals in RS-232 mode
- Auto-RTS feature makes half-duplex RS-485 communication effortless
- Fixed bias and jumper selectable termination provided on each RS-422/485 transmit and receive channel
- Software compatible with all operating systems as standard COM port
- RS-485 full-duplex (4-wire) fully supported
- RS-422/RS-485 only versions
(0 reviews)$219.00 – $349.00 Add To Quote -
Relays
WM-IIRO-8
Features
- 8 Optically-Isolated, Non-Polarized Digital Inputs with Change-of-State Detection
- 8 Form C SPDT Electromechanical Relays Can Switch Up to 1 Amp Each
- Relays Can be Configured for Level or Pulse Modes
- Microcontroller with SRAM and EEPROM
- Built-in Watchdog Timer
- NEMA4 Enclosure for Harsh Atmospheric, Industrial, or Marine Environments
- Ability to Program with Custom Firmware over Wireless Connection
- 900MHz Wireless Connection (up to 7 miles line-of-sight)
- RS-232 (or RS-485) Serial Interface to Host Computer
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- OEM Version without NEMA4 Enclosure
- Optional Input Only and Relay Only Versions
- 32K Expanded Memory Version
- Custom Firmware for Local Programs & Intelligence
(0 reviews)$439.00 Add To Quote -
Cables
C104-XXF-YY Cables, with IDC connectors and various lengths.
Features
- Standard length is 12 inches.
- Select from an assortment of cables with different lengths and pin-counts.
- Longer cables can be found on the CABXXF-YY page.
(0 reviews)$12.00 – $15.00 Add To Quote -
Analog Output
PCIe-DA16-16 Family Analog Output Card
Features
- 16-channel, 16-bit, digital-to-analog PCI Express Card
- Software / Hardware compatible with PCI-DA12-16
- >125k conversions per channel per second
- Dip-switch selectable analog output ranges of 2.5V, 5V, 10V, ±2.5V, ±5V, ±10V, 4-20mA
- Individual or simultaneous update of the DACs
- DACs restricted at power-on to prevent spurious outputs
- 24-bits of digital I/O
- Three 16-bit down counters (emulated 82C54)
- Can use the counter-timer to generate DAC updates, and/or IRQs
- VCCIO voltage available to the user via 0.5A resettable fuse
- RoHS Available
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$749.00 – $1,399.00 Add To Quote -
USB
USB-DIO-16H Digital Waveform I/O Module
FEATURES
- High-speed USB 2.0 device
- 16 high-speed digital I/O lines feature continuous, sustained throughput up to 16 MB/s
- Capable of 80 MB/s bursts with flexible synchronous clock and handshaking capabilities
- Continuous streaming over USB with no maximum waveform length
- On-board embedded FIFO memory up to 128 kByte
- 18 additional digital I/O lines arranged in 4 programmable groups
- All outputs buffered with 24 mA sink/source capabilities
- Type B USB connector features high-retention design
- Standard 68-pin SCSI high density latching connector
- Custom high-speed function driver
- Alternate embedded USB connector
- All required power drawn from USB port, no external power adapter required
- Small, (4″ x 4″ x 1.25″) rugged industrial enclosure
- PC/104 module size and mounting compatibility
- Type B USB connector features industrial strength and high-retention design
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
FACTORY OPTIONS
- LVTTL for 3.3V applications
- Input only, output only, and input/output versions
- OEM version (board only) features PC/104 module size and mounting compatibility
- External power for high current capabilities
- Extended temperature and DIN rail mounting provisions
- RoHS available, please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$329.00 – $749.00 Add To Quote -
Serial Communication
LPCI-COM-8SM Multiprotocol Serial Card
Features
- Eight or four-port Universal PCI serial communication card
- Supports field selectable RS-232, RS-422 or RS-485 (2-wire and 4-wire) protocols
- Includes type 16L788 octal UART with 64-Byte FIFO buffers in all modes
- Speeds up to 921kbps
- Meets MD2 Low Profile PCI Bus Specification
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Includes cable (no external breakout box required)
- RS-232 only versions also available
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$245.00 – $570.00 Add To Quote -
Analog Output
PCIe-DA16-6 Family Analog Output Cards
Features
- 6-channel, 16-bit, digital-to-analog PCI Express Card
- Software / Hardware compatible with PCI-DA12-6, >125k conversions per channel
- Dip-switch selectable analog output ranges of 2.5V, 5V, 10V, ±2.5V, ±5V, ±10V, 4-20mA
- Individual or simultaneous update of the DACs
- DACs restricted at power-on to prevent spurious outputs
- 16-bits of digital I/O
- VCCIO voltage available to the user via 0.5A resettable fuse
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
Factory Options
- Industrial Temperature (-40°C to +85°C)
- RoHS compliant version
(0 reviews)$449.00 – $699.00 Add To Quote