Search results: “PCI-IDO-xxA Series” – Page 4
Showing 31–40 of 47 results
-
Screw TerminalsUTBK-34
34-pin screw terminal connector for use with the 104-QUAD Series of PC/104 boards
(0 reviews) -
Screw TerminalsUTBK-50
Features
- Direct connect
- Universal 50-pin removable screw terminal board for use with USB-DIO-32, USB-DIO-32I, and USB-CTR-15 USB products
- Can also be used with the 104-AIM-32 and 104-COM-8S Series PC/104 boards
(0 reviews)$49.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Serial Communication104I-COM-8SM PCI/104 Multiprotocol Serial Board
Features
- 8, 4, and 2-port PCI-104 serial communication boards
- High performance octal PCI UART
- Field selectable RS-232, RS-422, and RS-485 protocols, jumper configured per port
- Speeds up to 1.8432Mbps in RS-422/485 modes (RS-232 up to 921.6 kbps)
- 16550 compatible register set with 64-byte FIFO for each TX and RX
- ±15kV ESD protection on all RS-232 signal pins
- Full modem control signals in RS-232 mode
- Auto-RTS feature makes half-duplex RS-485 communication effortless
- Fixed bias and jumper selectable termination provided on each RS-422/485 transmit and receive channel
- Software compatible with all operating systems as standard COM port
- RS-485 full-duplex (4-wire) fully supported
- RS-422/RS-485 only versions
(0 reviews)$219.00 – $349.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
CablesC104-XXF-YY Cables, with IDC connectors and various lengths.
Features
- Standard length is 12 inches.
- Select from an assortment of cables with different lengths and pin-counts.
- Longer cables can be found on the CABXXF-YY page.
(0 reviews)$12.00 – $19.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog OutputPCIe-DA16-6 Family Analog Output Cards
Features
- 6-channel, 16-bit, digital-to-analog PCI Express Card
- Software / Hardware compatible with PCI-DA12-6
- >125k conversions per channel per second
- Dip-switch selectable analog output ranges:
0-2.5V, 0-5V, 0-10V, ±2.5V, ±5V, ±10V, 4-20mA - Individual or simultaneous update of the DACs
- DACs restricted at power-on to prevent spurious outputs
- 16-bits of digital I/O
- VCCIO voltage available to the user via 0.5A resettable fuse
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
Factory Options
- Industrial Temperature (-40°C to +85°C)
- RoHS compliant version
(0 reviews)$449.00 – $699.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/OETH-IDIO-16 Ethernet Isolated Input, Solid State Relay Output Family
Features
- Ethernet 10/100 RJ45 connector for interfacing to CPU or network
- 16 optically isolated inputs (3V to 31V)
- 16 fully protected and isolated High-Side FET 2A outputs
- DHCP or static IP assignment
- Internal, removable terminal board for easy wiring
- PC/104 module size and mounting compatibility
- Small (4″ x 4″ x 1.7″) rugged industrial enclosure
- DC Jack and screw terminals for external power
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Eight- and four- input/output versions
- Input-only and solid-state output-only versions
- Economy “E” version without the screw terminal board
- OEM (board only) version with PC/104 mounting holes and PCB footprint
- Extended operating temperature (-40°C to +80°C)
- Wide input (7VDC to 30VDC) external power
- RoHS available
- DIN Rail mounting provision
(0 reviews)Call – $379.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/OETH-IIRO-16 Ethernet Isolated Input, Form C Relay Family
Features
- Ethernet 10/100 RJ45 connector for interfacing to CPU or network
- 16 optically isolated inputs (3V to 31V)
- 16 Form C electro-mechanical relays switch 1A
- DHCP or static IP assignment
- Internal, removable terminal board for easy wiring
- PC/104 module size and mounting compatibility
- Small (4″ x 4″x 1.7″) rugged industrial enclosure
- DC Jack and screw terminals for required external power
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Eight- and four- input/output versions
- Input-only and relay-only versions
- Economy “E” version without the screw terminal board
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- Extended operating temperature (-40°C to +80°C)
- Wide input (7VDC to 30VDC) external power
- RoHS available
- DIN rail mounting provision
(0 reviews)$229.00 – $399.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/OPCIe-DIO-48JPLS Digital I/O Card
Features
- 48 or 24 channel high-current TTL digital I/O lines
- Change of State (COS) detection and interrupt capabilities
- Compatible with industry standard 8255 PPI
- 68-pin SCSI pin-in-socket female connector on card mounting bracket
- User interrupt pin
- All 48 digital I/O lines buffered with 32mA source / 64mA sink
- Four and eight bit ports independently selectable for inputs or outputs
- Jumper configurable pull-ups/-downs on DIO lines
- 5V or 3.3V VCCIO configurable by jumper selection
- Poly-fused VCCIO available to the user on each I/O header
- Easy upgrade from PCI-DIO-48JPLS Family devices
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Non-latching connector
- Card without Change-of-State IRQ feature
- RoHS compliant version
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$378.00 – $454.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/OPCIe-DIO-48S/48/24S: Digital I/O w/CoS IRQ PCI Express Card Family
Features
- 48 or 24 channel high-current TTL digital I/O lines
- Change of State (COS) detection and interrupt capabilities
- Compatible with industry standard 8255 PPI
- Two 50-pin male headers with 24 digital lines each
- User interrupt pin on each DIO connector
- All 48 digital I/O lines buffered with 32mA source / 64mA sink current capabilities
- Four and eight bit ports independently selectable for inputs or outputs
- Pull-ups on DIO lines (optional pull-down)
- 5V VCCIO (3.3V optional)
- VCCIO available to the user on each I/O header
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- Easy upgrade from PCI-DIO-48S
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 3.3V VCCIO (LVTTL)
- Molex PC-style connector for maximum 5V VCCIO current sourcing capability
- RoHS compliant version
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$279.00 – $379.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog OutputPCIe-DA16-16 Family Analog Output Card
Features
- 16-channel, 16-bit, digital-to-analog PCI Express Card
- Software / Hardware compatible with PCI-DA12-16
- >125k conversions per channel per second
- Dip-switch selectable analog output ranges:
0-2.5V, 0-5V, 0-10V, ±2.5V, ±5V, ±10V, 4-20mA - Individual or simultaneous update of the DACs
- DACs restricted at power-on to prevent spurious outputs
- 24-bits of digital I/O
- Three 16-bit down counters (emulated 82C54)
- Can use the counter-timer to generate DAC updates, and/or IRQs
- VCCIO voltage available to the user via 0.5A resettable fuse
- RoHS Available
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$749.00 – $1,399.00 Add To Quote This product has multiple variants. The options may be chosen on the product page
