16 SE, 8 DIF
Showing all 11 results
-
Analog Input104-AIO16A/E 16-Bit, 16-Channel, PC/104 Multifunction Analog I/O Boards
Features
- 16-bit resolution A/D
- Up to 500kHz sampling rate
- 16 single-ended or 8 differential analog inputs
- 10 input ranges, unipolar or bipolar
- A/D starts from software, timer and external trigger
- Single channel or scan A/D modes
- On-board calibration reduces A/D converter offset and gain errors
- Noise reduction with channel oversampling
- Over-voltage protection of -40V to +55V
- 1024 sample data FIFO for A/D
- Two 12-bit D/A outputs and 16 high-current digital I/O lines
- DAC error calibration
- 16-bit programmable counter/timer
Factory Options
- FIFO up to 4K sample
- Programmable amplifier with gains of 1, 10, 100, and 1000
- Onboard DC/DC converter enables operation from a single +5V power supply
- Extended temperature operation (-40°C to + 85°C)
- RoHS Available. Please contact us for ordering information
(0 reviews)$724.00 – $909.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog InputAD8-16 ISA Eight Bit A/D Converter
Features
- 16 Single-ended or 8 differential analog inputs
- Eight-bit resolution
- Over 16,000 conversions per second
- Programmable scan rate and voltage ranges
- Two 8-bit analog outputs
- Three programmable counter/timers
- Eight digital inputs
- Eight digital outputs
- +5V output, 1 amp, fused
- Designed, made, supported, and manufactured in the USA
(0 reviews) -
Analog OutputA1216E: ISA Analog and Digital I/O Card
Features
- Eight differential or 16 single-ended input channels, switch selectable
- Twelve-bit resolution
- 100,000 samples per second
- On-board pacer clock and three 16-bit counter/timers
- Two independent, 12-bit D/A converters
- D/A converter outputs disabled at power-on
- Eight digital I/O lines (4 in, 4 out) accessible at primary I/O connector
- Twenty-four digital I/O lines on an auxiliary connector, configured in two 8-bit ports and two 4-bit ports
- Designed, made, supported, and manufactured in the USA
(0 reviews) -
Digital I/OENET-AIO16-16F Ethernet Multifunction Module — Preliminary
Features
- Ethernet 10/100/1000 Multifunction DAQ
- Sustained sampling speeds up to 1MHz
- 16-bit or 12-bit resolution A/D converter
- Flexible, software configured functionality
- 16 single-ended or 8 differential analog inputs
- 8 input ranges, 4 unipolar and 4 bipolar, channel-by-channel programmable
- Autocalibration and filtering onboard for accurate data
- Four 16-bit analog outputs with 4 factory ranges
- 16 high-current digital I/O lines
- TCP packet interface with Windows DLL API wrapper
- Small, (4″x4″x1.7″) rugged, steel industrial enclosure
- Designed, made, supported, and manufactured in the USA
On Board Intelligence
- Built on IEC 61508-certified TI Sitara AM6422 SoC
- Dual core Cortex-A53 @ 1.2 GHz + 2 Cortex R5F Real-time cores (800 MHz) + Coretex M4F
- Functional Safety IEC 61508: SoC has Systematic capability to SIL 3, hardware integrity to SIL 2 with TÜV SÜD certification
- 2× PRU-ICSSG subsystems supporting Profinet IRT/RT, EtherNet/IP, TSN, plus dedicated PROFIBUS UART
- 1 GB DDR3 RAM, 8 GB eMMC, microSD for expansion
- Full Root / SSH Access
- Secure, unique, Serial Number-based credentials
- TTL Serial console + Ethernet SSH for development
- Enterprise-Grade security
- Secure boot & hardware root-of-trust, Arm TrustZone TEE, debug security, rollback protection
- Crypto acceleration (AES-256, SHA-2, DRBG, PKA/ECC) & replay-protected memory (RPMB)
- Custom Code Ready
- Run your own Linux apps with full access to all DAQ and processor resources
- (disable our daemon if you’d like!)
- Toolchain & SDK
- Supports TI’s official Sitara / Linux SDK, or any ARM64 cross-compiler
- Getting Started with TI Sitara SDK
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +80°C)
- OEM version (board only), features PC/104 size and mounting compatibility
- DIN rail mounting provision
- RoHS available, please contact us for ordering information
(0 reviews) -
Analog InputLPCI-A16-16A, DISCONTINUED High-Speed, Universal PCI, 16-bit Multifunction Analog I/O Board
Features
- This product has been discontinued.
- Great News!
ACCES has designed the replacement for this discontinued product.
Just a click away to the LPCI-AIO16A. - 500kHz sampling rate
- 16 single-ended or 8 differential inputs, unipolar or bipolar
- Auto calibration and oversampling for accurate data
- Unique channel-by-channel programmable gain feature
- 1024 sample data FIFO for A/D (optional up to 64k samples)
- Two 12-bit D/A outputs and 16 digital I/O lines
- Software selectable synchronous, asynchronous and timed trigger modes
- 11 software/hardware selectable ranges of: 0-1V, 0-2V, 0-4V, 0-5V, 0-10V, ±0.5V, ±1V, ±2V, ±2.5V, ±5V, ±10V
- Meets Universal PCI and MD2 Low Profile PCI Bus Specification (Call for PCI-Express availability)
- Designed, made, supported, and manufactured in the USA
Factory Options
- FIFO up to 64k samples
- Factory input range / gain of 1-100
(0 reviews) -
Analog InputLPCI-AIO16A/E Multifunction Analog I/O Card Family
Features
- 16-bit resolution A/D
- Sampling rate:
- 16A version: 500Ksamples/sec (maximum aggregate)
- 16E version: 250Ksamples/sec (maximum aggregate)
- 16 single-ended or 8 differential analog inputs
- Channel-by-channel ranges of 0-1V, 0-2V, 0-5V, 0-10V, ±0.5V, ±1V, ±2V, ±2.5V, ±5V, ±10V
- A/D Start sources: Software, Timer, and External Trigger (rising or falling edge; software selectable)
- A/D Modes: Single Channel or Scan
- Offset / Gain Error Calibration
- Noise reduction with Channel Oversampling
- Over-voltage protection of -40V to +55V
- First In First Out (FIFO) A/D buffer
- Two 12-bit Digital-to-Analog (DAC) outputs
- DAC error calibration
- 16 high-current Digital I/O lines
- 16-bit programmable counter/timer
FACTORY OPTIONS
- A/D FIFO up to 32k samples
- Factory input range / gain of 1-100
(0 reviews)$1,078.00 – $1,518.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog InputPCIe-ADIO16-16F PCI Express Card Family with 16 SE or 8 Differential AI, 4 AO, 16 DIO
FEATURES
- PCI Express Half-Height/Length with Latching I/O Connector
- 2× 16-Bit, Bipolar, Differential, A/D Converters Sampling at up to 1Mhz, Simultaneously
- Software Selectable as 16+0, 8+4, or 0+8 (Single-Ended + Differential Inputs)
- 7 Channel-By-Channel Programmable Differential Input Ranges from ±0.3125V up to ±12V (48Vp-P)
- A/D Starts Via Software, External Input, or Periodic Timer
- A/D “Scan Start” Mode Optimizes Inter-Channel Timing
- High Impedance, 8-Channel Input: 500 MΩ
- 4 kSample FIFO plus DMA for Efficient, Robust Data Streaming
- 16× Digital I/O Pins with Flexible Secondary Functions
- Four 16-Bit Analog Outputs
- 5 Per-Channel Programmable Ranges: 0V to 5V, 0V to 10V, ±2.5V, ±5V, ±10V (optional 4-20mA)
- Outputs Drive ±10Ma Guaranteed
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- Onboard Watchdog with Dedicated Status Output
- RoHS Compliant
FACTORY OPTIONS
- 4-20mA or 10-50mA (Single Ended or Differential) ADC Input Ranges
- 4-20mA Output Range
- Extended Temperature Operation (-40°C to +85°C)
- Digital Integration Features: Pulse and PWM generation and measurement, edge-specific IRQs and counting.
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$469.00 – $1,219.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog InputPCI-A12-16A Family
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- 16 Single-Ended / 8 Differential Analog Inputs
- 12-Bit Resolution, 100kHz A/D Converter
- Eight Programmable Voltage Ranges (Unipolar and Bipolar) and 4-20mA Current Range
- FIFO Data and Point List Buffers. Both FIFOs 4K Samples / Words.
- On-board Pacer Clock and Counter Timers
- Two 12 bit Analog Outputs
- 24 Buffered Digital I/O Lines
- Software Drivers Included for Windows XP -> 10, both 32 & 64 bit
(0 reviews)$1,198.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog InputPCI-AI12-16A 16-Channel, 12-Bit Analog Input PCI Card Family
Features
- 16 Single-Ended / 8 Differential Analog Inputs
- 12-Bit Resolution, 100kHz A/D Converter
- Eight Programmable Voltage Ranges (Unipolar & Bipolar) and 4-20mA Current Range
- FIFO Data and Point List Buffers (‘A’ version). Both FIFOs 2K
- On-board Pacer Clock and Counter Timers
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Number of Analog Inputs Can Be Expanded up to 256 by use of our External Signal Conditioners/Sub-Multiplexers.
- Software Drivers Included for Windows XP -> 10, both 32 & 64 bit
(0 reviews)$798.00 – $958.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USBUSB-AIO16-16F-OEM Family
FEATURES
- High-speed USB 2.0 multifunction DAQ
- Sustained sampling speeds up to 1MHz
- 16-bit or 12-bit resolution A/D converter
- Flexible, software configured functionality
- 16 single-ended or 8 differential analog inputs
- 8 input ranges, 4 unipolar and 4 bipolar, channel-by-channel programmable
- Autocalibration and oversampling for real-time accurate data
- A/D starts via software, timer, or external trigger
- Two 16-bit analog outputs; 4kHz update rate
- 16 high-current digital I/O lines
- Alternate micro-fit embedded USB header connector
- USB/104 form-factor for OEM embedded applications
- Small, (4″ x 4″ x 1.25″) rugged industrial enclosure
- All required power drawn from USB port, no external power adapter required
- Type B USB connector features industrial strength and high-retention design
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Pseudo-differential analog inputs
- Four 16-bit analog outputs; 4kHz update rate
- External power for high current capabilities
- Screw terminals for power input provide high retention connection
- Industrial operating temperature (-40°C to +85°C)
- OEM (board only) version for embedded applications
- Single-ended current inputs (4-20mA or 10-50mA)
- Voltage dividers per input
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$394.00 – $899.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USBUSB-AIO16-16F: 16 Channel, Multifunction Analog Input/Output USB Module Family
FEATURES
- High-speed USB 2.0 multifunction DAQ
- Sustained sampling speeds up to 1MHz
- 16-bit or 12-bit resolution A/D converter
- Flexible, software configured functionality
- 16 single-ended or 8 differential analog inputs
- 8 input ranges, 4 unipolar and 4 bipolar, channel-by-channel programmable
- Autocalibration and oversampling for real-time accurate data
- A/D starts via software, timer, or external trigger
- Two or four 16-bit analog outputs; 4kHz update rate
- 16 high-current digital I/O lines
- Alternate micro-fit embedded USB header connector
- USB/104 form-factor for OEM embedded applications
- Small, (4″ x 4″ x 1.25″) rugged industrial enclosure
- All required power drawn from USB port, no external power adapter required
- Industrial strength and high-retention Type B USB connector
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Pseudo-differential analog inputs
- External power for high current capabilities
- Screw terminals for power input provide high retention connection
- Industrial operating temperature (-40°C to +85°C)
- OEM (board only) version for embedded applications
- Single-ended current inputs (4-20mA or 10-50mA)
- Voltage dividers per input
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$419.00 – $924.00 Add To Quote This product has multiple variants. The options may be chosen on the product page
