No
Showing all 12 results
-
Analog Input104-AIO16A/E 16-Bit, 16-Channel, PC/104 Multifunction Analog I/O Boards
Features
- 16-bit resolution A/D
- Up to 500kHz sampling rate
- 16 single-ended or 8 differential analog inputs
- 10 input ranges, unipolar or bipolar
- A/D starts from software, timer and external trigger
- Single channel or scan A/D modes
- On-board calibration reduces A/D converter offset and gain errors
- Noise reduction with channel oversampling
- Over-voltage protection of -40V to +55V
- 1024 sample data FIFO for A/D
- Two 12-bit D/A outputs and 16 high-current digital I/O lines
- DAC error calibration
- 16-bit programmable counter/timer
Factory Options
- FIFO up to 4K sample
- Programmable amplifier with gains of 1, 10, 100, and 1000
- Onboard DC/DC converter enables operation from a single +5V power supply
- Extended temperature operation (-40°C to + 85°C)
- RoHS Available. Please contact us for ordering information
(0 reviews)$579.00 – $729.00 Add To Quote -
Analog Output
104-AO12-4 PC/104 Analog Output Board
Features
Analog Output:
- 4 channels, 12 bit resolution
- Selectable unipolar or bipolar ranges 0-5V, 0-10V, ±5V, ±10V
- 100K conversions per second
- 3mA drive
Digital Input/Output:
- 24 parallel bits (two 8 bit ports, two 4 bit ports)
- 64mA sink, 32mA source (ports A and B)
- I/O pulled up to 5V
- Change of state detect on port C
- Type 82C55 PPI mode 0 (1 and 2 optional)
- Industry Standard 50 pin header
Timer/Counter: Type 82C54 (3×16 bit)
- Software Supported Modes:
- Three 16-Bit type 82C54
- Event counter, Frequency output
- Frequency and Pulse measurement
I/O Connectors:
- Two Industry Standard 50 pin headers
RoHS Available. Please contact us for ordering information
(0 reviews)$268.00 Add To Quote -
Analog Output
A1216E: ISA Analog and Digital I/O Card
Features
- Eight differential or 16 single-ended input channels, switch selectable
- Twelve-bit resolution
- 100,000 samples per second
- On-board pacer clock and three 16-bit counter/timers
- Two independent, 12-bit D/A converters
- D/A converter outputs disabled at power-on
- Eight digital I/O lines (4 in, 4 out) accessible at primary I/O connector
- Twenty-four digital I/O lines on an auxiliary connector, configured in two 8-bit ports and two 4-bit ports
- Designed, made, supported, and manufactured in the USA
(0 reviews)Call Add To Quote -
Analog Output
DA12-8 and DA12-16 ISA Eight and Sixteen Output 12-bit Analog Output Cards
Features
- Eight or Sixteen independent double-buffered analog outputs
- 12-Bit resolution
- Six Voltage Output Ranges: 0-2.5V, 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Individual range selection per channel
- Channel-by-channel or simultaneous update modes
- Outputs held at zero volts at power-up
- Setup and calibration software included
- Designed, made, supported, and manufactured in the USA
(0 reviews)Call Add To Quote -
Analog Input
M.2-ADIO16-8F M.2 Card with 8 Single-Ended or 4 Differential Analog Inputs, 4 Analog Outputs, & 16 DIO
FEATURES
- M.2 2260/2280 “B/M” size Card with latching I/O connectors
- 16-Bit 1MSPS Complete Data Acquisition System
- Sustained Sampling Rates Up To 1MHz
- High Impedance, 8-Channel Input: 1 MΩ
- Differential Input Voltage Ranges from ±0.64V to ±24.576V
- Flexible, Software Configured Functionality
- 8 Pseudo-differential (Single-Ended) or 4 Differential Inputs
- Fast DMA transfers from 4 kSample FIFO
- Four 16-Bit Analog Outputs
- Independently Programmable Output Ranges:
0V To 5V, 0V To 10V, ±2.5V, ±5V, ±10V - Outputs Drive ±10Ma Guaranteed
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- Independently Programmable Output Ranges:
- 16 Digital lines with alternate functions including ADC and DAC Trigger
- RoHS Standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 4-20mA or 10-50mA ADC input ranges
(Single Ended or Differential options) - Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$249.00 – $669.00 Add To Quote -
Analog Input
mPCIe-ADIO16-8F Family PCI Express Mini Card with 8 SE or 4 Differential AI, 4 AO, & 16 DIO
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, Multi-Function DAQ with latching I/O connectors
- 16-Bit 1MSPS Complete Data Acquisition System
- Sustained Sampling Rates Up To 1MHz
- High Impedance, 8-Channel Input: 1 MΩ
- Differential Input Voltage Ranges from ±0.64V to ±24.576V
- Flexible, Software Configured Functionality
- 8 Pseudo-differential (Single-Ended) or 4 Differential Inputs
- Fast DMA transfers from 4 kSample FIFO
- Four 16-Bit Analog Outputs
- Independently Programmable Outputs: 0V To 5V, 0V To 10V, ±2.5V, ±5V, ±10V
- Outputs Drive ±10mA Guaranteed
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- 16 Digital lines with alternate functions including ADC and DAC Trigger
- RoHS Standard
- Available now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 4-20mA or 10-50mA ADC input ranges
(Single Ended or Differential options) - Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$249.00 – $669.00 Add To Quote -
Analog Input
PCIe-ADIO16-16F PCI Express Card Family with 16 SE or 8 Differential AI, 4 AO, 16 DIO
FEATURES
- PCI Express Half-Height/Length with Latching I/O Connector
- 2× 16-Bit, Bipolar, Differential, A/D Converters Sampling at up to 1Mhz, Simultaneously
- Software Selectable as 16+0, 8+4, or 0+8 (Single-Ended + Differential Inputs)
- 7 Channel-By-Channel Programmable Differential Input Ranges from ±0.3125V up to ±12V (48Vp-P)
- A/D Starts Via Software, External Input, or Periodic Timer
- A/D “Scan Start” Mode Optimizes Inter-Channel Timing
- High Impedance, 8-Channel Input: 500 MΩ
- 4 kSample FIFO plus DMA for Efficient, Robust Data Streaming
- 16× Digital I/O Pins with Flexible Secondary Functions
- Four 16-Bit Analog Outputs
- 5 Per-Channel Programmable Ranges: 0V to 5V, 0V to 10V, ±2.5V, ±5V, ±10V (optional 4-20mA)
- Outputs Drive ±10Ma Guaranteed
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- Onboard Watchdog with Dedicated Status Output
- RoHS Compliant
FACTORY OPTIONS
- 4-20mA or 10-50mA (Single Ended or Differential) ADC Input Ranges
- 4-20mA Output Range
- Extended Temperature Operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$469.00 – $1,219.00 Add To Quote -
Analog Output
M.2-AIO16-16F M.2 Card with 16 Single-Ended or 8 Differential Analog Inputs and 4 Analog Outputs
FEATURES
- M.2 2260/2280 “B/M” size Card with latching I/O connectors
- 2× 16-bit, bipolar, differential, A/D converters sampling at up to 1MHz, simultaneously (2MSPS aggregate)
- Software selectable as 16+0, 8+4, or 0+8 (single-ended + differential inputs)
- Seven channel-by-channel Programmable differential input ranges from ±0.3125V up to ±12V
- A/D starts via software, external input, or periodic timer
- A/D “scan start” mode optimizes inter-channel timing
- High Impedance, 16-channel input: 500 MΩ
- 4 kSample FIFO plus DMA for efficient, robust data streaming
- Four 16-Bit Analog Outputs
- 5 per-channel programmable ranges: 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Outputs drive ±10mA
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- Two digital I/O with flexible secondary functions
- Onboard watchdog with status output
- RoHS Standard
- Works in your computers’ NVME slots!
- Available Now in mPCIe form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 4-20mA or 10-50mA ADC input ranges
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$319.00 – $859.00 Add To Quote -
Analog Output
mPCIe-AIO16-16F PCI Express Mini Card with 16 Single-Ended or 8 Differential Analog Inputs, 4 Analog Outputs, & 2 DIO
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, Multi-Function DAQ with latching I/O connectors
- 2× 16-bit, bipolar, differential, A/D converters sampling at up to 1MHz, simultaneously (2MSPS aggregate)
- Software selectable as 16+0, 8+4, or 0+8 (single-ended + differential inputs)
- Seven channel-by-channel Programmable differential input ranges from ±0.3125V up to ±12V
- A/D starts via software, external input, or periodic timer
- A/D “scan start” mode optimizes inter-channel timing
- High Impedance, 16-channel input: 500 MΩ
- DMA+FIFO (4 kSamples) for efficient, robust data streaming
- Four 16-Bit Analog Outputs
- 5 per-channel programmable ranges: 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Outputs drive ±10mA
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- Two digital I/O with flexible secondary functions
- Onboard watchdog with status output
- RoHS Standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 4-20mA or 10-50mA ADC input ranges
- Extended temperature operation (-40°C to +85°C)
- Vibration-resistant epoxy and/or conformal coating
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$319.00 – $859.00 Add To Quote -
Analog Output
USB-AO-ARB1: 8MHz 16-bit Analog Waveform Output USB Board
FEATURES
- High-Speed USB 2.0 Device (USB 3.0+ Compatible)
- High-Retention USB Connector
- Fast Waveform Output; Up to 8M Samples/Sec
- Small, Portable Digital to Analog Single-Ended Output at 16-Bit Resolution
- 16K Sample FIFO Buffer On-Board
- Jumper Selectable Analog Output Ranges of:
0-2.5V, 0-5V, 0-10V, ±2.5V, ±5V, ±10V - Two 4-Bit I/O Ports Independently Selectable for Inputs or Outputs
- All 8 DIO Lines Buffered with Sink 32mA / Source 32mA Current Capabilities
- Jumper Selectable 10KΩ Pull-Up/Pull-Down Resistors on DIO Lines
- Standard 16-Pin IDC Connector for DIO and Gate
- BNC Connectors for DAC Output and Gate Control
- PC/104 Module Size and Mounting Compatibility
- Alternate Embedded USB Connector
- Small, Rugged, Industrial Enclosure
FACTORY OPTIONS
- Board only, without enclosure, features PC/104 module size and mounting compatibility
- Extended Temperature (-40°C to 85°C)
- +5VDC regulated AC/DC supply and onboard DC-power input jack
- Screw terminals installed for DC-power input (no jack, no wall-wart)
- Replace +5VDC digital logic with +3.3V I/O
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$395.00 Add To Quote -
Analog Output
USB-AO16-16A Analog Output Module
Features
- 4, 8, or 16 analog outputs with 12 or 16-bit resolution
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- Unipolar and bipolar output ranges of 0-10V, ±5V (contact factory for additional ranges)
- Real-time hardware calibration per channel
- Update outputs individually or simultaneously at speeds up to 4kHz
- Two 16-bit analog inputs and 16 lines of digital I/O
- All digital I/O lines buffered with 10mA source, 24mA sink current capabilities
- Resettable 0.5A fused +5V available to the user
- Includes external AC to 12V @ 1Amp DC regulated adapter
- Connections made via industry-standard 37-pin D-Sub connectors
- USB/104 form-factor for OEM embedded applications
- Standard (enclosed) version includes external 12V power supply (USB-PWR-12V)
- OEM version (board only) features PC/104 module size and mounting compatibility
- Alternate micro-fit embedded USB header connector
- Custom high-speed function driver (non-HID)
- Type B USB connector features industrial strength and high-retention design
- Small, (4″ x 4″ x 1.25″) rugged, industrial enclosure
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended operating temperature (-40° to +85°C)
- Analog output ranges (±10V, 0-5V, or nearly anything you specify!)
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- Screw terminals for 12V input power connection
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$329.00 – $769.00 Add To Quote -
Analog Output
USB-DA12-8: 8-Channel, 12-Bit Analog Waveform Output USB Module
Features
- High-speed USB 2.0 device
- Up to 125K conversions per DAC per second
- Streaming waveform data at over 400,000 DAC outputs per second total
- 128K Sample buffer on-board, or Infinitely long streaming waveforms!
- Buffered waveforms at up to 1 million DAC conversions per second total
- ILDA compatible
- Small, portable 8-channel, 12-bit, digital to analog outputs
- Double-buffered allowing simultaneous update of all DACs
- Analog output ranges of 0-2.5V, 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Single-ended and differential outputs on separate connectors
- PC/104 module size and mounting compatibility
- Rugged small-sized (4″ x 4″ x 1.25″) steel enclosure
- Type B USB connector features industrial strength and high-retention design
- Designed, made, supported, and manufactured in the USA
Factory Options
- Resistors in series with differential connector for impedance matching
- DIN rail mounting provision
- Economy ‘E’ version available without screw terminal board
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$399.00 – $629.00 Add To Quote
