4 In & 4 Out
Showing all 13 results
-
Digital I/OETH-IDIO-16 Ethernet Isolated Input, Solid State Relay Output Family
Features
- Ethernet 10/100 RJ45 connector for interfacing to CPU or network
- 16 optically isolated inputs (3V to 31V)
- 16 fully protected and isolated High-Side FET 2A outputs
- DHCP or static IP assignment
- Internal, removable terminal board for easy wiring
- PC/104 module size and mounting compatibility
- Small (4″ x 4″ x 1.7″) rugged industrial enclosure
- DC Jack and screw terminals for external power
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Eight- and four- input/output versions
- Input-only and solid-state output-only versions
- Economy “E” version without the screw terminal board
- OEM (board only) version with PC/104 mounting holes and PCB footprint
- Extended operating temperature (-40°C to +80°C)
- Wide input (7VDC to 30VDC) external power
- RoHS available
- DIN Rail mounting provision
(0 reviews)Call – $379.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/OETH-IIRO-16 Ethernet Isolated Input, Form C Relay Family
Features
- Ethernet 10/100 RJ45 connector for interfacing to CPU or network
- 16 optically isolated inputs (3V to 31V)
- 16 Form C electro-mechanical relays switch 1A
- DHCP or static IP assignment
- Internal, removable terminal board for easy wiring
- PC/104 module size and mounting compatibility
- Small (4″ x 4″x 1.7″) rugged industrial enclosure
- DC Jack and screw terminals for required external power
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Eight- and four- input/output versions
- Input-only and relay-only versions
- Economy “E” version without the screw terminal board
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- Extended operating temperature (-40°C to +80°C)
- Wide input (7VDC to 30VDC) external power
- RoHS available
- DIN rail mounting provision
(0 reviews)$229.00 – $399.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/OM.2-IDIO-8 Isolated Input Relay Output Card
FEATURES
- 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
- 8 OR 4 optically-isolated non-polarized inputs up to 31VDC/AC
- 8 or 4 fully protected high-side FET outputs switch from 5 to 34VDC at up to 2A
- Models now include Digital Integration Features
- Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- Pulse Train (“generate n pulses”) and PWM generation
- 9” cable (228MM), standard
- Panel-mountable isolation module with 37-pin female D-Sub connector
- 8 LVTTL I/O lines programmable as inputs or outputs in groups of 4
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$313.00 – $408.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/OM.2-IDIO-8HL Isolated Input Relay Output Card
FEATURES
- 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
- 8 or 4 optically-isolated non-polarized inputs up to 31VDC/AC
- 8 or 4 fully protected FET outputs
- Available as High-Side switch from 6 to 48 VDC at up to 1A
- or Low-Side switch from 5 to 48 VDC at up to 0.5A
- or half high-side and half low-side
- 8 LVTTL I/O lines programmable as inputs or outputs in groups of 4
- Change-of-State (COS) detection IRQ generation
- 9” cable (228MM), standard
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews) -
Digital I/OmPCIe-IDIO-8HL Isolated Input Relay Output Card
FEATURES
- mPCIe (PCI Express Mini Card) Type F1 and latching I/O connectors
- 8 or 4 optically-isolated non-polarized inputs up to 31VDC/AC
- 8 or 4 fully protected FET outputs
- Available as High-Side switch from 6 to 48 VDC at up to 1A
- or Low-Side switch from 5 to 48 VDC at up to 0.5A
- or half high-side and half low-side
- 8 LVTTL I/O lines programmable as inputs or outputs in groups of 4
- Change-of-State (COS) detection IRQ generation
- 9” cable (228MM), standard
- RoHS standard
- Available in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews) -
Digital I/OM.2-IIRO-8 and M.2-IIRO-4 Isolated Input Relay Output Cards
FEATURES
- 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
- 8 or 4 optically-isolated non-polarized inputs
- 8 or 4 electromechanical 1A relay outputs
- Models now include Digital Integration Features
- 8 or 4 bits with Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- 8 or 4 bits with Pulse Train (“generate n pulses”) and PWM generation
- 9” cable (228MM), standard
- Panel-mountable isolation module with 37-pin male D-Sub connector
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +70°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$224.00 – $408.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/OmPCIe-IDIO-8
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 8 or 4 optically-isolated non-polarized inputs up to 31VDC/AC
- 8 or 4 fully protected high-side FET outputs switch from 5 to 34VDC at up to 2A
- Models now include Digital Integration Features
- Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- Pulse Train (“generate n pulses”) and PWM generation
- 9” cable (228MM), standard
- Panel-mountable isolation module with 37-pin Female D-Sub connector
- 8 LVTTL I/O lines programmable as inputs or outputs in groups of 4 (Pulled up)
- RoHS standard
-
- Ask about Digital Integration Features!
- Outputs with pulse/train / PWM / frequency / and Quadrature generation, Inputs with digital filtering and flexible measurement of pulse duration, frequency, and event counting, IRQ generation and more.
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40°C to +85°C)
- Pull down LVTTL lines.
- TTL: CMOS signaling with user supplied VCCIO (+5V)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$313.00 – $408.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/OmPCIe-IIRO-8
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 8 OR 4 optically-isolated non-polarized inputs
- 8 OR 4 electromechanical 1A relay outputs
- Models now include Digital Integration Features
- 8 or 4 bits with Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- 8 or 4 bits with Pulse Train (“generate n pulses”) and PWM generation
- 9” cable (228MM), standard
- Panel-mountable isolation module with 37-pin male D-Sub connector
- RoHS standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +70°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$313.00 – $408.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog InputUSB-AI16-2A Dual Channel 16-Bit 2MS/Second Simultaneous Analog/Digital Input Board
FEATURES
- High-speed USB 2.0 device, USB 3.0 compatible
- Two 1MHz 16-bit A/D converters for 2MHz aggregate sampling rate
- Analog and digital inputs acquired simultaneously, with timestamping
- 16 kSample FIFO (shared by all inputs)
- Per channel software selectable ranges of 0-1V, 0-2V, 0-5V, 0-10V, ±1V, ±2V, ±5V, ±10V
- Eight digital I/O’s (four inputs & four high-current outputs)
- High retention USB type B connector for vibration-proof, worry-free communications
- Alternate USB micro-fit header can be used to reduce board footprint in embedded applications
- Small rugged steel industrial enclosure
FACTORY OPTIONS
- OEM version (board only) features PC/104 module size and mounting compatibility
- Extended temperature (-40° to +85°C)
- External power
- Screw terminals for power input provide high retention connection
- LVTTL DIO lines
- RoHS compliant product
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$595.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USBUSB-IDIO-16
FEATURES
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 16 individually optically isolated inputs (channel to channel and channel to ground)
- Polarity insensitive AC/DC inputs accept up to 31 VDC or AC RMS
- Jumper selectable filtering per input channel for AC or voltage transients
- 16 optically isolated fully protected high-side FETs capable of switching up to 2A
- Internal removable screw terminal board for easy wiring
- All power drawn from USB port, no external power adapter required
- USB/104 form-factor for OEM embedded applications
- Small, (4″ x 4″ x 1.4″) rugged industrial enclosure
- Custom high-speed function driver
- PC/104 module size and mounting compatibility
- Type B USB connector features industrial strength and high-retention design
- Designed, made, supported, and manufactured in the USA
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer
Configurable power-on defaults
Digital input debouncing and latching
Digital output Pulse Width Modulation (PWM) and Matrix Mapping
FACTORY OPTIONS
- Input only and solid state output only versions
- Eight or four input/output versions
- External power for high current capabilities
- Extended temperature and DIN rail mounting provisions
- OEM version (board only) features PC/104 module size and mounting compatibility
- RoHS available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$199.00 – $364.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-IDIO-16L: 16 Isolated Input, 16 Isolated Low-Side Solid State Relay USB Module Family
Features
- 16 individually optically isolated inputs (channel to channel and channel to ground)
- Polarity insensitive AC/DC inputs accept up to 31 VDC or AC RMS
- Jumper selectable filtering per input channel for AC or voltage transients
- 16 optically isolated fully protected low-side FETs capable of sinking up to 500mA each
- Internal removable screw terminal board for easy wiring
- All power drawn from USB port, no external power adapter required
- USB/104 form-factor for OEM embedded applications
- Small (4″ x 4″x 1.4″) rugged industrial enclosure
- Custom high-speed function driver
- PC/104 module size and mounting compatibility
- Type B USB connector features industrial strength and high-retention design
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Input only and solid state output only versions
- Eight or four input/output versions
- External power for high current capabilities
- Extended temperature and DIN rail mounting provisions
- OEM version (board only) features PC/104 module size and mounting compatibility
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$199.00 – $364.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/OUSB-IIRO-16: 4, 8, and 16 Isolated Input and Form C Relay Output USB Module Family
FEATURES
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 16 optically isolated inputs
- 16 Form C electromechanical 1A relays
- Internal, removable screw terminal board for easy wiring
- Small (4″ x 4″x 1.4″) rugged industrial enclosure
- Custom high-speed function driver
- PC/104 module size and mounting compatibility
- Type B USB connector features industrial strength and high-retention design
- Designed, made, supported, and manufactured in the USA
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer
Configurable power-on defaults
Digital input debouncing and latching
Digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Onboard Watchdog Timer
FACTORY OPTIONS
- Eight or four input/output versions available
- Input only and relay only versions
- External power from AC/DC adapter for high current capabilities
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- DIN rail mounting provision
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$209.00 – $389.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USBUSB-IIRO4-2SM: USB Isolated I/O and Serial Communication Modules
Features
- Multifunction I/O board with isolated digital I/O and serial communication
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- Four optically isolated digital inputs
- Four Form C electromechanical 1A relays
- Two serial ports, field selectable RS-232/422/485
- Small (4″x4″X1.8″) rugged industrial enclosure
- PC/104 module size and mounting compatibility
- All required power drawn from USB port, no external power adapter required
- Expansion USB hub port connector
- Type B USB connector features industrial strength and high-retention design
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
Factory Options:
- Four digital input/output version (USB-IIRO-4DB)
- Two serial ports only version (USB-COM-2SM)
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- DIN rail mounting for industrial environments
- RoHS compliant version.
- Please contact us for ordering information
(0 reviews)$219.00 – $279.00 Add To Quote This product has multiple variants. The options may be chosen on the product page
