No
Showing all 15 results
-
Analog Output
104-AO12-4 PC/104 Analog Output Board
Features
Analog Output:
- 4 channels, 12 bit resolution
- Selectable unipolar or bipolar ranges 0-5V, 0-10V, ±5V, ±10V
- 100K conversions per second
- 3mA drive
Digital Input/Output:
- 24 parallel bits (two 8 bit ports, two 4 bit ports)
- 64mA sink, 32mA source (ports A and B)
- I/O pulled up to 5V
- Change of state detect on port C
- Type 82C55 PPI mode 0 (1 and 2 optional)
- Industry Standard 50 pin header
Timer/Counter: Type 82C54 (3×16 bit)
- Software Supported Modes:
- Three 16-Bit type 82C54
- Event counter, Frequency output
- Frequency and Pulse measurement
I/O Connectors:
- Two Industry Standard 50 pin headers
RoHS Available. Please contact us for ordering information
(0 reviews)$268.00 Add To Quote -
Digital I/O
104-IIRO-16 Isolated Relay I/O Board
Features
- 16 optically-isolated, non-polarized CMOS compatible digital inputs accept ±31VDC or AC rms
- IRQ on input change of state (COS) eliminates the need for constant polling
- Slow/fast filter to accommodate AC voltages and noisy DC inputs
- 16 long-life form C electro-mechanical relays switch up to 1A each
Factory Options: (call for pricing and availability)
- Economy version without COS feature
- Input only and relay only versions
- Expanded input voltage levels
- RoHS Available. Please contact us for ordering information
(0 reviews)$149.00 – $295.00 Add To Quote -
Analog Output
A1216E: ISA Analog and Digital I/O Card
Features
- Eight differential or 16 single-ended input channels, switch selectable
- Twelve-bit resolution
- 100,000 samples per second
- On-board pacer clock and three 16-bit counter/timers
- Two independent, 12-bit D/A converters
- D/A converter outputs disabled at power-on
- Eight digital I/O lines (4 in, 4 out) accessible at primary I/O connector
- Twenty-four digital I/O lines on an auxiliary connector, configured in two 8-bit ports and two 4-bit ports
- Designed, made, supported, and manufactured in the USA
(0 reviews)Call Add To Quote -
Analog Output
DA-06A ISA Bus Six Channel Analog Output Card with Voltage and Current Outputs
Features
- Six independent analog outputs
- 12-Bit resolution
- Voltage Output Ranges: 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Current Output Ranges: 0-20mA, 4-20mA
- Individual range selection per channel
- Three update modes including simultaneous update
- Additional 24-bit parallel digital input/output port
- Setup and calibration software included
- Designed, made, supported, and manufactured in the USA
Factory Options
- Current Output Ranges: 0-50mA and 10-50mA optional
(0 reviews)Call Add To Quote -
Analog Output
DA12-8 and DA12-16 ISA Eight and Sixteen Output 12-bit Analog Output Cards
Features
- Eight or Sixteen independent double-buffered analog outputs
- 12-Bit resolution
- Six Voltage Output Ranges: 0-2.5V, 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Individual range selection per channel
- Channel-by-channel or simultaneous update modes
- Outputs held at zero volts at power-up
- Setup and calibration software included
- Designed, made, supported, and manufactured in the USA
(0 reviews)Call Add To Quote -
Analog Input
LPCI-A16-16A, DISCONTINUED High-Speed, Universal PCI, 16-bit Multifunction Analog I/O Board
Features
- This product has been discontinued.
- Great News!
ACCES has designed the replacement for this discontinued product.
Just a click away to the LPCI-AIO16A. - 500kHz sampling rate
- 16 single-ended or 8 differential inputs, unipolar or bipolar
- Auto calibration and oversampling for accurate data
- Unique channel-by-channel programmable gain feature
- 1024 sample data FIFO for A/D (optional up to 64k samples)
- Two 12-bit D/A outputs and 16 digital I/O lines
- Software selectable synchronous, asynchronous and timed trigger modes
- 11 software/hardware selectable ranges of: 0-1V, 0-2V, 0-4V, 0-5V, 0-10V, ±0.5V, ±1V, ±2V, ±2.5V, ±5V, ±10V
- Meets Universal PCI and MD2 Low Profile PCI Bus Specification (Call for PCI-Express availability)
- Designed, made, supported, and manufactured in the USA
Factory Options
- FIFO up to 64k samples
- Factory input range / gain of 1-100
(0 reviews)Call Add To Quote -
Analog Input
LPCI-AIO16A/E Multifunction Analog I/O Card Family
Features
- 16-bit resolution A/D
- Sampling rate:
- 16A version: 500Ksamples/sec (maximum aggregate)
- 16E version: 250Ksamples/sec (maximum aggregate)
- 16 single-ended or 8 differential analog inputs
- Channel-by-channel ranges of 0-1V, 0-2V, 0-5V, 0-10V, ±0.5V, ±1V, ±2V, ±2.5V, ±5V, ±10V
- A/D Start sources: Software, Timer, and External Trigger (rising or falling edge; software selectable)
- A/D Modes: Single Channel or Scan
- Offset / Gain Error Calibration
- Noise reduction with Channel Oversampling
- Over-voltage protection of -40V to +55V
- First In First Out (FIFO) A/D buffer
- Two 12-bit Digital-to-Analog (DAC) outputs
- DAC error calibration
- 16 high-current Digital I/O lines
- 16-bit programmable counter/timer
FACTORY OPTIONS
- A/D FIFO up to 32k samples
- Factory input range / gain of 1-100
(0 reviews)$1,078.00 – $1,518.00 Add To Quote -
Analog Input
PCI-AI12-16A 16-Channel, 12-Bit Analog Input PCI Card Family
Features
- 16 Single-Ended / 8 Differential Analog Inputs
- 12-Bit Resolution, 100kHz A/D Converter
- Eight Programmable Voltage Ranges (Unipolar & Bipolar) and 4-20mA Current Range
- FIFO Data and Point List Buffers (‘A’ version). Both FIFOs 2K
- On-board Pacer Clock and Counter Timers
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Number of Analog Inputs Can Be Expanded up to 256 by use of our External Signal Conditioners/Sub-Multiplexers.
- Software Drivers Included for Windows XP -> 10, both 32 & 64 bit
(0 reviews)$798.00 – $958.00 Add To Quote -
Serial Communication
PCI-COM-2S and PCI-422/485-2
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Dual-port serial communications card for PCI bus
- Supports RS-232(PCI-COM2S only), RS-422, and RS-485 protocols
- Automatic control of RS-485 driver under Windows systems
- Includes type 16550 UART with 16-byte FIFO buffers
- Baud rates up to 460,800 baud
- Detected as standard COM ports under Windows 95/98/98se/NT4/NT2000/XP -> 10, both 32 & 64 bit etc
- No base address or IRQ switches to set
- Support for Wind River VxWorks (call for ordering information)
- Designed, made, supported, and manufactured in the USA
(0 reviews)$199.00 – $229.00 Add To Quote -
Serial Communication
PCI-COM232-2 RS232 MultiPort Serial
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Two or Four RS-232 Serial Communication ports.
- Throughput up to 921.6 Kbps.
- 32-Bit PCI-bus Interface.
- UART includes 16-Byte FIFO Buffer.
- Compatible w/ MS-DOS, Windows, & Linux.
- FCC and CE approved
- Designed, made, supported, and manufactured in the USA
(0 reviews)$69.00 – $124.00 Add To Quote -
Serial Communication
PCI-COM422-4 RS422 Serial Card
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Four-port serial communications card for PCI bus
- Supports RS-422 protocol
- Includes type 16550 UART with 16-byte FIFO buffers
- Baud rates up to 460,800 baud
- Choice of I/O connection methods
- Detected as standard COM ports by Windows
- No base address or IRQ switches to set
- Support for Wind River VxWorks (call for ordering information)
- Designed, made, supported, and manufactured in the USA
(0 reviews)$284.00 – $324.00 Add To Quote -
Serial Communication
PCI-COM485-4 Four Port RS485
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Four-port serial communications card for PCI bus
- Supports RS-485 multidrop networks
- Includes type 16550 UART with 16-byte FIFO buffers
- Baud rates up to 460,800 baud
- Automatic control of RS-485 driver under Windows systems
- Choice of I/O connection methods
- No base address or IRQ switches to set
- Support for Wind River VxWorks (call for ordering information)
- Designed, made, supported, and manufactured in the USA
(0 reviews)$284.00 – $324.00 Add To Quote -
Analog Output
PCI-DA12-2/4/6 & PCI-DA12-8/16
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Two, four, six, eight and sixteen (respectively), 12-Bit, double-buffered, digital-to-analog converters
- Program control provides means for either individual update or simultaneous update of the DACs. The 8 and 16 channel models can use the counter-timer to generate DAC updates, and/or IRQs. The 2/4/6 models can use an external signal in this way.
- Unique, automatic control of DAC outputs to prevent spurious outputs at power-on
- 24-bits (PCI-DA12-8/16) or 16-bits (PCI-DA12-2/4/6) digital I/O buffered with tri-stateable transceivers
- Three 16-bit Down counters (models PCI-DA12-8/16 only)
- Resettable-fused +5VDC available for external use
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$1,258.00 – $4,278.00 Add To Quote -
Digital I/O
PCI-IDI Series: 16, 32, or 48 Channel Isolated Digital Input Cards
Features
- 16, 32, or 48 individually optically isolated AC/DC inputs
- Change-of-state detection (IRQ) on selected inputs (certain models)
- Polarity insensitive AC/DC inputs accept up to 60VDC or AC rms
- Optically isolated channel to channel and channel to ground
- Universal PCI, PCI-X, 3.3V and 5V compatible
- AC or voltage transient filtering
- Universal PCI, PCi-X, 3.3V and 5V compatible (Call for PCI-Express availability)
Factory Options
- RoHS Available.
- Support for Wind River VxWorks
(0 reviews)$420.00 – $798.00 Add To Quote -
USB
USB-IIRO4-2SM: USB Isolated I/O and Serial Communication Modules
Features
- Multifunction I/O board with isolated digital I/O and serial communication
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- Four optically isolated digital inputs
- Four Form C electromechanical 1A relays
- Two serial ports, field selectable RS-232/422/485
- Small (4″x4″X1.8″) rugged industrial enclosure
- PC/104 module size and mounting compatibility
- All required power drawn from USB port, no external power adapter required
- Expansion USB hub port connector
- Type B USB connector features industrial strength and high-retention design
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
Factory Options:
- Four digital input/output version (USB-IIRO-4DB)
- Two serial ports only version (USB-COM-2SM)
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- DIN rail mounting for industrial environments
- RoHS compliant version.
- Please contact us for ordering information
(0 reviews)$219.00 – $279.00 Add To Quote