4 FETs
Showing all 5 results
-
Digital I/O
ETH-IDIO-16 Ethernet Isolated Input, Solid State Relay Output Family
Features
- Ethernet 10/100 RJ45 connector for interfacing to CPU or network
- 16 optically isolated inputs (3V to 31V)
- 16 fully protected and isolated High-Side FET 2A outputs
- DHCP or static IP assignment
- Internal, removable terminal board for easy wiring
- PC/104 module size and mounting compatibility
- Small (4″ x 4″ x 1.7″) rugged industrial enclosure
- DC Jack and screw terminals for external power
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Eight- and four- input/output versions
- Input-only and solid-state output-only versions
- Economy “E” version without the screw terminal board
- OEM (board only) version with PC/104 mounting holes and PCB footprint
- Extended operating temperature (-40°C to +80°C)
- Wide input (7VDC to 30VDC) external power
- RoHS available
- DIN Rail mounting provision
(0 reviews)Call – $379.00 Add To Quote -
Digital I/O
M.2-IDIO-8 Isolated Input Relay Output Card
FEATURES
- 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
- 8 OR 4 optically-isolated non-polarized inputs up to 31VDC/AC
- 8 or 4 fully protected high-side FET outputs switch from 5 to 34VDC at up to 2A
- Change-of-State (COS) detection IRQ generation
- 9” cable (228MM), standard
- Panel-mountable isolation module with 37-pin female D-Sub connector
- 8 LVTTL I/O lines programmable as inputs or outputs in groups of 4
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$313.00 – $408.00 Add To Quote -
Digital I/O
mPCIe-IDIO-8: Isolated Input, Solid State Relay Output, mPCIe Card Family
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 8 or 4 optically-isolated non-polarized inputs up to 31VDC/AC
- 8 or 4 fully protected high-side FET outputs switch from 5 to 34VDC at up to 2A
- Change-of-State (COS) detection IRQ generation
- 9” cable (228MM), standard
- Panel-mountable isolation module with 37-pin Female D-Sub connector
- 8 LVTTL I/O lines programmable as inputs or outputs in groups of 4 (Pulled up)
- RoHS standard
-
- Ask about Digital Integration Features!
- Outputs with pulse/train / PWM / frequency / and Quadrature generation, Inputs with digital filtering and flexible measurement of pulse duration, frequency, and event counting, IRQ generation and more.
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40°C to +85°C)
- Pull down LVTTL lines.
- TTL: CMOS signaling with user supplied VCCIO (+5V)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$313.00 – $408.00 Add To Quote -
USB
USB-IDIO-16: 16 Isolated Input, 16 Isolated High-Side Solid State Relay USB Module fAMILY
FEATURES
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 16 individually optically isolated inputs (channel to channel and channel to ground)
- Polarity insensitive AC/DC inputs accept up to 31 VDC or AC RMS
- Jumper selectable filtering per input channel for AC or voltage transients
- 16 optically isolated fully protected high-side FETs capable of switching up to 2A
- Internal removable screw terminal board for easy wiring
- All power drawn from USB port, no external power adapter required
- USB/104 form-factor for OEM embedded applications
- Small, (4″ x 4″ x 1.4″) rugged industrial enclosure
- Custom high-speed function driver
- PC/104 module size and mounting compatibility
- Type B USB connector features industrial strength and high-retention design
- Designed, made, supported, and manufactured in the USA
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer
Configurable power-on defaults
Digital input debouncing and latching
Digital output Pulse Width Modulation (PWM) and Matrix Mapping
FACTORY OPTIONS
- Input only and solid state output only versions
- Eight or four input/output versions
- External power for high current capabilities
- Extended temperature and DIN rail mounting provisions
- OEM version (board only) features PC/104 module size and mounting compatibility
- RoHS available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$199.00 – $364.00 Add To Quote -
USB
USBP-II8IDO4A
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 8 individually optically isolated digital inputs
- Polarity insensitive AC/DC inputs accept up to 31VDC or AC RMS
- Jumper selectable filtering per input channel for AC or voltage transients
- Four optically isolated fully protected solid state high-side FET outputs
- Outputs capable of switching from 5-34 VDC at up to 3A each
- Two general purpose 16-bit A/D inputs
- Custom high-speed function driver
- Alternate embedded USB connector
- All required power drawn from USB port, no external power adapter required
- Pico-I/O™ module size (60mm x 72mm) & mounting capability
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 4-20mA range for analog inputs
- Extended temperature (-40°C to +85°C) operation
(0 reviews)$295.00 Add To Quote