Digital I/O
Showing 31–40 of 40 results
-
USB
USBP-DIO16RO8 USB, Pico-I/O™ Sized Digital I/O and Relay Board Family
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 16-channel TTL/LVTTL digital I/O
- All 16 I/O lines buffered with 32mA sink/source current capabilities
- 8 Form C electromechanical relays switch 1A
- Custom high-speed function driver
- Alternate embedded USB connector
- All required power drawn from USB port, no external power adapter required
- Pico-I/O™ module size (60mm x 72mm) & mounting capability
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature (-40°C to +85°C) operation
(0 reviews)Price range: $139.00 through $239.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
System
RIDACS Remote Intelligent Data Acquisition and Control Systems
FEATURES
- Remote intelligent analog and digital I/O unit with opto-isolated RS-485 multi-drop interface to host computer
- Eight-channel programmable gain, 12-bit resolution A/D converter
- Wide variety of configurations for analog, digital, and mixed configurations
- NEMA4 enclosure for harsh environments
- Data stored in RAM can be accessed at the convenience of the computer
- All communication is ASCII-based command/response protocol at rates up to 28.8 Kbaud
- Industry-standard 8051 compatible microcontroller
- Designed, made, supported, and manufactured in the USA
(0 reviews) -
USB
USB-CTR-15 Counter/Timer USB Module
Features
- High-Speed USB 2.0 device, USB 3.0 compatible
- Fifteen independent 16-bit counter/timers (5 x 82C54-10)
- Clock, gate and out signals from all 15 channels buffered and accessed via 1 connector
- Supports input frequencies up to 10MHz
- Standard configuration adapter pre-configured for event counting, frequency measurement, pulse width measurement, or frequency generation
- Removable screw-terminal board for easy wiring
- User wiring adapter card provided for flexible yet easy counter concatenation/configuration
- PC/104 module size (3.550″ by 3.775″) and mounting compatibility
- Rugged small-sized (4″ x 4″ x 1.25″) steel enclosure
- Type B USB connector features industrial strength and high-retention design
(0 reviews)$299.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-DIO-16H: 16-bit Family of Digital Waveform I/O USB Modules
FEATURES
- High-speed USB 2.0 device
- 16 high-speed digital I/O lines feature continuous, sustained throughput up to 16 MB/s
- Capable of 80 MB/s bursts with flexible synchronous clock and handshaking capabilities
- Continuous streaming over USB with no maximum waveform length
- On-board embedded FIFO memory up to 128 kByte
- 18 additional digital I/O lines arranged in 4 programmable groups
- All outputs buffered with 24 mA sink/source capabilities
- Type B USB connector features high-retention design
- Standard 68-pin SCSI high density latching connector
- Custom high-speed function driver
- Alternate embedded USB connector
- All required power drawn from USB port, no external power adapter required
- Small, (4″ x 4″ x 1.25″) rugged industrial enclosure
- PC/104 module size and mounting compatibility
- Industrial strength and high-retention Type B USB connector
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer
Configurable power-on defaults
Digital input debouncing and latching
Digital output Pulse Width Modulation (PWM) and Matrix Mapping
FACTORY OPTIONS
- LVTTL for 3.3V applications
- Input only, output only, and input/output versions
- OEM version (board only) features PC/104 module size and mounting compatibility
- External power for high current capabilities
- Extended temperature and DIN rail mounting provisions
- RoHS available, please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)Price range: $379.00 through $859.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-DIO-32: 32-Bit Digital Input/Output USB Module
FEATURES
- Small (3.5 by 3.7 in.), portable, 32-channel Digital I/O USB module
- Four 8-bit ports independently selectable for inputs or outputs
- High-Speed USB 2.0 device, USB 3.0 compatible
- All 32 I/O lines buffered with Sink 64mA / Source 32mA current capabilities
- Standard 50-pin IDC connector with key
- Removable screw terminal adapter for easy wiring
- USB/104 form-factor for OEM embedded applications
- OEM version (board only) features PC/104 module size and mounting compatibility
- Alternate micro-fit embedded USB header connector
- Custom high-speed function driver (non-HID)
- Type B USB connector features industrial strength and high-retention design
- Small (4″ x 4″ x1.25″) rugged industrial enclosure
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Three 82C54 counter/timers
- Extended operating temperature (-40° to +85°C)
- External power components and AC/DC adapter
- Screw terminals for power input provide high retention connection
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- 24-channel version compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$194.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-DIO-32I: USB 32-Bit Independently Selectable Digital I/O Module
Features
- Small (3.5 by 3.7 in.), portable, 32-channel USB digital I/O module
- 32-bits independently selectable for inputs or outputs
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- All 32 I/O lines buffered with Sink 64mA / Source 32mA current capabilities
- Standard 50-pin IDC connector with key
- Removable screw terminal adaptor for easy wiring
- USB/104 form-factor for OEM embedded applications
- OEM version (board only) features PC/104 module size and mounting compatibility
- Alternate micro-fit embedded USB header connector
- Custom high-speed function driver (non-HID)
- Type B USB connector features industrial strength and high-retention design
- Small (4″ x 4″ x1.25″) rugged industrial enclosure
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Support for Wind River VxWorks (call for ordering information)
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended operating temperature (-40° to +85°C)
- External power components and AC/DC adapter
- Screw terminals for power input provide high retention connection
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- 24-channel version compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls
- RoHS Available. Please contact us for ordering information
(0 reviews)$229.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
USB-DIO-48: 48-Channel Digital Input/Output USB Module
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 48 lines of digital I/O
- High retention type B USB connector
- Mini USB header connector in parallel with type B for stacking and embedded applications
- Six (6) 8-bit ports independently selectable for inputs or outputs
- All I/O lines buffered with 32 mA source, 64mA sink current capabilities
- I/O Buffers can be enabled or tri-stated under program control
- Drivers and sample application provided
- Jumper selectable I/O pulled up to 5V for contact monitoring, pulled down to ground or floating
- Jumper selectable power provided via USB cable or external power supply for higher source current capabilities
- Resettable fused +5VDC outputs per 50-pin connector
- Standard 50-pin IDC-type shrouded connectors with key
- PC/104 size (3.550 by 3.775 in.)
- Rugged industrial enclosure
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
Factory Options
- Board only version with no enclosure
- External power components and regulated AC/DC adapter
- Extended operating temperature (-40° to +85°C)
- DIN rail mounting provision
- Screw terminals for power input provide high retention connection
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)Price range: $229.00 through $718.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
USB-DIO-96: 96-Channel Digital Input/Output Module on USB
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 96 lines of digital I/O
- High retention type B USB connector
- Mini USB header connector in parallel with type B for stacking and embedded applications
- Twelve (12) 8-bit ports independently selectable for inputs or outputs
- All I/O lines buffered with 32 mA source, 64mA sink current capabilities
- I/O Buffers can be enabled or tri-stated under program control
- Drivers and sample application provided
- Jumper selectable I/O pulled up to 5V for contact monitoring, pulled down to ground or floating
- Jumper selectable power provided via USB cable or external power supply for higher source current capabilities
- Resettable fused +5VDC outputs per 50-pin connector
- Standard 50-pin IDC-type shrouded connectors with key
- PC/104 size (3.550 by 3.775 in.)
- Rugged industrial enclosure
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- LabView VI driver
- Designed, made, supported, and manufactured in the USA
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer
- Configurable power-on defaults
- Digital input debouncing and latching
- Digital output Pulse Width Modulation (PWM) and Matrix Mapping
FACTORY OPTIONS
- Board only version with no enclosure (-OEM)
- External power components and regulated AC/DC adapter
- Extended operating temperature (-40° to +85°C, -T)
- DIN rail mounting provision
- Screw terminals for power input provide high retention connection
- RoHS-compliant version.
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)Price range: $329.00 through $999.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-DIO24-CTR6: 24-Channel, USB Digital Input/Output Module with 6 Counter/Timers
FEATURES
- 24 channel USB digital I/O module
- High-Speed USB 2.0 device, USB 3.0 compatible
- Two 8-bit & two 4-bit ports each software configurable for input or output
- Field selectable CMOS (+5V) or LVTTL (3.3V) VCCIO signal levels
- CMOS: All 24 I/O lines buffered with 32 mA sink and source
- LVTTL: All 24 I/O lines buffered with 24 mA sink and source
- Two 82C54 counters with all pins available at I/O connector
- Type B USB connector features industrial strength and high-retention design
- Jumper selectable I/O pulled up to 5V for contact monitoring, pulled down to ground or floating
- Jumper selectable power provided via USB cable or external power supply for higher source current capabilities
- VCCIO at connector for general purpose use, protected by polyfuse
- Resettable fused +5VDC outputs per 50-pin connector
- Standard 50-pin IDC header connector with key
- Alternate micro-fit embedded USB header connector
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- USB/104 form-factor for OEM embedded applications
- Small, board itself is PC/104 size (3.550″x3.775″)
- Custom high-speed function driver (non-HID)
- Rugged, steel, industrial enclosure measures just 4″x4″x1.25″
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
FACTORY OPTIONS
- External power for higher source current capabilities
- Screw terminals for power input provide high retention connection
- OEM (board only) version for embedded applications
- Industrial operating temperature (-40°C to +85°C)
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)Price range: $129.00 through $224.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
USB-DIO48DO24 Digital I/O and FET Board
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 48 lines of digital I/O
- 24 fully protected and isolated FET 2A outputs
- High retention type B USB connector
- Mini USB header connector in parallel with type B for stacking and embedded applications
- Six (6) 8-bit ports independently selectable for inputs or outputs
- All I/O lines buffered with 32 mA source, 64mA sink current capabilities
- I/O Buffers can be enabled or tri-stated under program control
- Jumper selectable I/O pulled up to 5V for contact monitoring, pulled down to ground or floating in 8-bit groups
- Jumper selectable power provided via USB cable or external power supply for higher source current capabilities
- Resettable fused +5VDC outputs per 50-pin connector
- Standard 50-pin IDC-type shrouded connectors with key
- Removable internal terminal board for ease of wiring
- PC/104 module size and mounting compatibility (3.550″ by 3.775″)
- Rugged, industrial, steel enclosure
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- -HV option provides 6 – 52V outputs at 1.3A
- 24 I/O, 12 FET output version
- 24 FET output only version
- OEM (board only) version for embeddeed applications
- External power components and regulated AC/DC adapter
- Extended operating temperature (-40° to +85°C)
- Screw terminals for power input provide high retention connection
- RoHS Compliant version. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)Price range: $274.00 through $399.00 Add To Quote This product has multiple variants. The options may be chosen on the product page















