accessories
Showing 16–30 of 65 results
-
-
Cables
CAB-COM-8S
Breakout Cable for PCI-COM485/8 Serial Communication Card. Normally it is included when purchasing the card, but it is also separately available.
(0 reviews)Call for price Add To Quote -
-
Cables
CAB37-18Y
“Y” Cable for connecting two AIM-16 Analog Input Multiplexers to an A/D Card.
(0 reviews)$29.00 Add To Quote -
Cables
CAB37-xx DB37 Female to Female Cables
Ribbon Cables with a pair of Female DB37 connectors
CAB37-18 is a standard 18-inch long (455mm) cable.Other popular lengths include:
CAB37-36 (36 inches, $29) and
CAB37-48 (48 inches, $32).
Custom lengths available, minimum quantities may apply (add $2 per foot over 18″).Accepts up toe 300mA
(0 reviews)$25.00 – $42.00 Add To Quote -
Cables
CAB37YS-4
Split cable assembly for use when two CA37’s are used
(0 reviews)Call for price Add To Quote -
-
Cables
CAB50-xx
Ribbon Cables – CAB50-6 is designed for use with the A16A and A24A, and has a 50-pin female header on one end, and a card-edge socket on the other.
(0 reviews)$30.00 Add To Quote -
Cables
CAB50F-YY Female to Female Header Mating Cables
Ribbon Cables. Our CAB50F-6 and CAB50F-xx have 50-pin female header mating connectors on both ends (for cables longer than 6′, usually add $2 per foot over 6′).
(0 reviews)$12.00 – $38.00 Add To Quote -
Cables
CAB68-36J and CAB68-36L
CAB68-36 Cable is a 3′ round-wire cable for use with the PCI-DIO-48JPL(S) for elegant OEM solutions. The cable is available with either one-touch lock latches (CAB68-36L), or jack screws (CAB68-36J).
(0 reviews)$40.00 Add To Quote -
Cables
CAB78-37/2
CAB78-37/2 Cable is a 6′ round-wire “Y” cable for use with the PCI-IIRO-16 and the PCI-IDIO-16 which connects to the DB-78 connector on these card’s mounting brackets and terminated in two DB-37 female connectors.
(0 reviews)$80.00 Add To Quote -
Accessories
IIB-24, 24 Isolated Input Board with 50 Pin IDC Connector
Features
- 24 optically isolated inputs
- Non-polarized inputs accept 31VDC or 24VAC
- Input isolation rated at 500V channel to channel and channel to ground
- Jumper-selectable filters per channel for AC inputs and to eliminate undesired response to electrically noisy DC signals
- Pairs with compatible 24-channel digital input boards
- On-board screw terminals
- Industry standard 50 pin keyed IDC connector
- Power for circuit isolation accepted from either pin-49 from host digital input connector or alternatively from power screw terminals
- LED indicates presence of +5VDC power for board operation
- PC/104 module size and mounting compatibility
- Designed, made, supported, and manufactured in the USA
(0 reviews)$149.00 Add To Quote -
Accessories
LVDT-8U 8-Port LVDT/RVDT Excitation, Signal Conditioning Board
Features
- Eight or Four channels of AC LVDT conditioning
- Full-bridge and Half-bridge LVDTs supported
- Offset and wide-range gain calibration pots
- Removable screw terminal blocks for easy connection and serviceability
- Use easily with PLC or PC-based Data Acquisition
- Non-multiplexed, simultaneous conditioned outputs
- Compatible with other ACCES A/D products for use in legacy systems using DB37M connector
- Jumper selected LED display utility for quick and easy operating verification of connected LVDTs
- Factory oscillator frequency of 10kHz
- Master / Slave excitation frequency synchronization
- Onboard DC/DC converter with reverse power protection operates on a single 12VDC external source
- Designed, made, supported, and manufactured in the USA
(0 reviews)$295.00 – $1,229.00 Add To Quote -
Other
MP104-DIN USB/104 DIN Rail Mount
USB/104 form factor DIN Rail Mounting Kit
(0 reviews)$25.00 Add To Quote -