24 I/O (8/8/4/4)
Showing 16–22 of 22 results
-
Analog Output
PCIe-DA16-16 Family Analog Output Card
Features
- 16-channel, 16-bit, digital-to-analog PCI Express Card
- Software / Hardware compatible with PCI-DA12-16
- >125k conversions per channel per second
- Dip-switch selectable analog output ranges:
0-2.5V, 0-5V, 0-10V, ±2.5V, ±5V, ±10V, 4-20mA - Individual or simultaneous update of the DACs
- DACs restricted at power-on to prevent spurious outputs
- 24-bits of digital I/O
- Three 16-bit down counters (emulated 82C54)
- Can use the counter-timer to generate DAC updates, and/or IRQs
- VCCIO voltage available to the user via 0.5A resettable fuse
- RoHS Available
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$749.00 – $1,399.00 Add To Quote -
Digital I/O
PCIe-DIO-24DCS, PCI Express Digital I/O Card w/Counters and CoS Detection
Features
- 24 high-current DIO lines
- Three optional 82C54 Counter / Timers
- IRQ generation from Port C bit 3, and Counter A2 (“C” models) and/or Change-of-State (COS) Detection (“S” models)
- DIO lines buffered
- Four and eight bit ports independently selectable for inputs or outputs
- Software selectable 10k ohm Pull-up/Pulldown resistors on DIO lines
- Jumper selectable VCCIO (5V, 3.3V, 2.5V,1.8V)
- VCCIO voltage available to the user via 0.5A resettable fuse
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40° to +85°C)
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$229.00 – $299.00 Add To Quote -
Digital I/O
PCIe-DIO-24HC: PCI Express Digital I/O Card with Counters and IRQ
Features
- x1 lane PCI Express Digital I/O board
- 24 high-current DIO lines
- Three 82C54 Counter/Timers
- IRQ generation from Port C bit 3, an external source, and Counter A2, configurable for edge- or level- triggered
- DIO lines buffered
- Four and eight bit ports independently selectable for inputs or outputs
- User configurable 10k ohm Pull-up/Pull-down resistors on DIO lines
- Jumper selectable VCCIO (5V, 3.3V)
- VCCIO voltage available to the user via 0.5A resettable fuse
- Latching 50 pin male header on card mounting bracket for secure cable retention
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40° to +85°C)
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$329.00 Add To Quote -
Digital I/O
PCIe-DIO-24HS PCI Express Digital I/O Card w/CoS IRQ
Features
- x1 lane PCI Express digital I/O board
- 24 high-current DIO lines
- IRQ generation from Port C bit 3, and Counter A2 (“C” models) and/or Change-of-State (COS) Detection (“S” models)
- DIO lines buffered
- Four and eight bit ports independently selectable for inputs or outputs
- User configurable 10k ohm Pull-up/Pull-down resistors on DIO lines
- Jumper selectable VCCIO (5V, 3.3V)
- VCCIO voltage available to the user via 0.5A resettable fuse
- Latching 50 pin connector
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40° to +85°C)
- Quick-disconnect tab on mounting bracket for wiring harness or cable shield ground (with non-latching 50 pin connector)
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$209.00 – $239.00 Add To Quote -
Digital I/O
PCIe-DIO-48S/48/24S: Digital I/O w/CoS IRQ PCI Express Card Family
Features
- 48 or 24 channel high-current TTL digital I/O lines
- Change of State (COS) detection and interrupt capabilities
- Compatible with industry standard 8255 PPI
- Two 50-pin male headers with 24 digital lines each
- User interrupt pin on each DIO connector
- All 48 digital I/O lines buffered with 32mA source / 64mA sink current capabilities
- Four and eight bit ports independently selectable for inputs or outputs
- Pull-ups on DIO lines (optional pull-down)
- 5V VCCIO (3.3V optional)
- VCCIO available to the user on each I/O header
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- Easy upgrade from PCI-DIO-48S
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 3.3V VCCIO (LVTTL)
- Molex PC-style connector for maximum 5V VCCIO current sourcing capability
- RoHS compliant version
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$279.00 – $379.00 Add To Quote -
USB
USB-DIO24-CTR6: 24-Channel, USB Digital Input/Output Module with 6 Counter/Timers
FEATURES
- 24 channel USB digital I/O module
- High-Speed USB 2.0 device, USB 3.0 compatible
- Two 8-bit & two 4-bit ports each software configurable for input or output
- Field selectable CMOS (+5V) or LVTTL (3.3V) VCCIO signal levels
- CMOS: All 24 I/O lines buffered with 32 mA sink and source
- LVTTL: All 24 I/O lines buffered with 24 mA sink and source
- Two 82C54 counters with all pins available at I/O connector
- Type B USB connector features industrial strength and high-retention design
- Jumper selectable I/O pulled up to 5V for contact monitoring, pulled down to ground or floating
- Jumper selectable power provided via USB cable or external power supply for higher source current capabilities
- VCCIO at connector for general purpose use, protected by polyfuse
- Resettable fused +5VDC outputs per 50-pin connector
- Standard 50-pin IDC header connector with key
- Alternate micro-fit embedded USB header connector
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- USB/104 form-factor for OEM embedded applications
- Small, board itself is PC/104 size (3.550″x3.775″)
- Custom high-speed function driver (non-HID)
- Rugged, steel, industrial enclosure measures just 4″x4″x1.25″
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
FACTORY OPTIONS
- External power for higher source current capabilities
- Screw terminals for power input provide high retention connection
- OEM (board only) version for embedded applications
- Industrial operating temperature (-40°C to +85°C)
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$129.00 – $224.00 Add To Quote -
Digital I/O
USB-DIO48DO24 Digital I/O and FET Board
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 48 lines of digital I/O
- 24 fully protected and isolated FET 2A outputs
- High retention type B USB connector
- Mini USB header connector in parallel with type B for stacking and embedded applications
- Six (6) 8-bit ports independently selectable for inputs or outputs
- All I/O lines buffered with 32 mA source, 64mA sink current capabilities
- I/O Buffers can be enabled or tri-stated under program control
- Jumper selectable I/O pulled up to 5V for contact monitoring, pulled down to ground or floating in 8-bit groups
- Jumper selectable power provided via USB cable or external power supply for higher source current capabilities
- Resettable fused +5VDC outputs per 50-pin connector
- Standard 50-pin IDC-type shrouded connectors with key
- Removable internal terminal board for ease of wiring
- PC/104 module size and mounting compatibility (3.550″ by 3.775″)
- Rugged, industrial, steel enclosure
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 24 I/O, 12 FET output version
- 24 FET output only version
- OEM (board only) version for embeddeed applications
- External power components and regulated AC/DC adapter
- Extended operating temperature (-40° to +85°C)
- Screw terminals for power input provide high retention connection
- RoHS Compliant version. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$274.00 – $399.00 Add To Quote