-
Showing 16–30 of 36 results
-
Digital I/OmPCIe-II-16: 16, 8, or 4 Isolated Input, mPCIe Card Family
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 16, 8 or 4 optically isolated, non-polarized inputs up to 31VDC/AC
- Change-of-State (COS) detection IRQ generation
- Panel-mountable isolation module with 37-pin male D-Sub connector
- 4 LVTTL I/O lines programmable as inputs or outputs in groups of 2 lines
- 9” cable (228MM), standard, connects isolation module to mPCIe-DIO card
- RoHS standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$218.00 – $323.00 Add To Quote -
Digital I/O
mPCIe-IIRO-8: Isolated Input, Electromechanical Relay Output mPCIe Card Family
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 8 OR 4 optically-isolated non-polarized inputs
- 8 OR 4 electromechanical 1A relay outputs
- Change-of-State (COS) detection IRQ generation
- 9” cable (228MM), standard
- Panel-mountable isolation module with 37-pin male D-Sub connector
- RoHS standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +70°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$313.00 – $408.00 Add To Quote -
Digital I/O
P104-DIO-96 Digital I/O Board
Features
- PC/104-Plus (PCI-104 Optional)
- 48 or 96 Channel TTL-DTL high speed digital I/O
- Software selectable in vs. out as 8 bit and 4 bit ports
- Emulates 4 industry standard 8255 PPIs (mode 0)
- Full 32-bit PCI interface design
- Buffered circuits for higher driving capacity
- Low CPU overhead
- Known power-up states
- Output port status read back
- Standard 50-pin IDC connectors (x4)
- 0 to +70° C and -40 to +85° C versions available
- RoHS Available. Please contact us for ordering information
- Designed, made, supported, and manufactured in the USA
(0 reviews)$379.00 – $539.00 Add To Quote -
Digital I/O
PCI-DIO-120, 96 & 72 Digital I/O Cards
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible
(See the PCIe-DIO-120 page for the PCI-Express versions) - Up to 120 channels of digital I/O
- All I/O lines buffered on the card
- Four- and eight-bit groups independently selectable for I/O on each 24-bit port
- Hysteresis correction and choice of pull-up and pull-down resistors on I/O lines
- Interrupt and interrupt-disable capability
- Tri-stateable I/O ports under software control
- +5V supply available to user
- Compatible with industry standard I/O racks like Gordos, Opto-22, Potter & Brumfield, Western Reserve Controls, etc.
- Automatically detected by Windows
-
No base address or IRQ switches to set
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$319.00 – $389.00 Add To Quote - Universal PCI, PCI-X, 3.3V and 5V compatible
-
Digital I/O
PCI-DIO-24D/H PCI 24-Bit Digital I/O Cards
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible
- PCI Express versions available:
- For the PCI-DIO-24D: PCIe-DIO-24D
- For the PCI-DIO-24H: PCIe-DIO-24H
- 24 bits of digital I/O
- Four and eight bit ports independently selectable for I/O
- All 24 I/O lines buffered by transceivers on the card
- I/O buffers can be enabled/disabled under program control
- Pull-ups on I/O lines
- Resettable fused +5 VDC output available
- PCI-DIO-24H compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, Potter and Brumfield, etc.
- Optional 10 MHz counters
- Automatically detected under Windows
- No base address or IRQ switches to set
Factory Options
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$229.00 – $259.00 Add To Quote -
Digital I/O
PCI-DIO-48S PCI Digital I/O Card w/CoS IRQ
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible
(Call for PCI-Express version availability) - 24 or 48 bits of digital I/O
- Interrupt generation on input change-of-state (Model 48S)
- All I/O lines buffered on the card
- I/O buffers can be enabled/disabled under program control
- Four- and eight-bit ports independently selectable for I/O
- Pull-ups on I/O lines
- +5V supply available to the user
- Compatible with industry standard I/O racks like Gordos, Opto-22, Potter & Brumfield, etc.
- No base address or IRQ switches to set
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$239.00 – $379.00 Add To Quote - Universal PCI, PCI-X, 3.3V and 5V compatible
-
Digital I/O
PCI-IDI Series
Features
- 16, 32, or 48 individually optically isolated AC/DC inputs
- Change-of-state detection (IRQ) on selected inputs (certain models)
- Polarity insensitive AC/DC inputs accept up to 60VDC or AC rms
- Optically isolated channel to channel and channel to ground
- Universal PCI, PCI-X, 3.3V and 5V compatible
- AC or voltage transient filtering
- Universal PCI, PCi-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$210.00 – $394.00 Add To Quote -
Relays
PCI-IDIO-16, 16 Channel Isolated Digital Input/Output Card
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Sixteen optically-isolated, non-polarized digital inputs
- Opto-isolated channel to channel and channel to ground
- Sixteen fully protected FET outputs
- Can detect input state change and assert interrupt
- No switches or jumpers to set, all options software selectable
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$339.00 Add To Quote -
Digital I/O
PCI-IDO-48(A) Series Solid State Relay Cards
Features
- 16, 32, or 48 individually optically isolated solid-state outputs
- “A” version supports Simultaneous output across all ports via external rising edge on P2 pin 50
- Solid-state design permits high-speed switching and long-life expectancy
- Load voltages up to 60 Volts, current up to 2A
- Lower cost per point than externally-racked solid-state relay modules
- Optically isolated channel to channel and channel to ground
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$199.00 – $349.00 Add To Quote -
Digital I/O
PCI-IIRO-16 Isolated Relay I/O Card
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Eight or sixteen optically isolated, non-polarized digital inputs
- Eight or sixteen electro-mechanical relay outputs
- Opto-isolated channel to channel and channel to ground
- Can detect input state change and assert interrupt
- Automatically detected under Windows
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$329.00 – $429.00 Add To Quote -
Digital I/O
PCIe-DIO-120, 96, & 72, Digital I/O Cards
Features
- 120, 96, or 72 channel high-current digital I/O’s
- IRQ generation from Port C bit 3
- All I/O lines buffered
- On each 24-bit group, four and eight bit ports independently selectable as inputs or outputs
- Jumper selectable 10k ohm pull-up/pull-downs on I/O lines per four and eight bit ports
- Global jumper selectable VCCIO (5V, 3.3V, 2.5V, 1.8V) logic levels
- VCCIO voltage available to the user via 0.5A resettable fuse per 50 pin connector
- I/O ports globally tri-stateable through software
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- Easy upgrade from PCI-DIO-72, 96, or 120
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- RoHS compliant version
- Industrial temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$309.00 – $369.00 Add To Quote -
Digital I/O
PCIe-DIO-144 144 Channel Digital I/O PCI Express Card
Features
- 144 channel high-current digital I/Os
- On each 24-bit group, four and eight bit ports independently selectable as inputs or outputs
- Jumper selectable 10k ohm pull-up/pull-downs on I/O lines per four and eight bit ports
- Global jumper selectable VCCIO (5V, 3.3V, 2.5V, 1.8V) logic levels
- VCCIO voltage available to the user via 0.5A resettable fuse per 50 pin connector
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- RoHS compliant version
- Industrial temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$399.00 Add To Quote -
Digital I/O
PCIe-DIO-24DCS Digital I/O Card w/Counters and CoS Detection
Features
- 24 high-current DIO lines
- Three optional 82C54 Counter / Timers
- IRQ generation from Port C bit 3, and Counter A2 (“C” models) and/or Change-of-State (COS) Detection (“S” models)
- DIO lines buffered
- Four and eight bit ports independently selectable for inputs or outputs
- Software selectable 10k ohm Pull-up/Pulldown resistors on DIO lines
- Jumper selectable VCCIO (5V, 3.3V, 2.5V,1.8V)
- VCCIO voltage available to the user via 0.5A resettable fuse
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40° to +85°C)
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$229.00 – $299.00 Add To Quote -
Digital I/O
PCIe-DIO-24HS PCI Express Digital I/O Card w/CoS IRQ
Features
- x1 lane PCI Express digital I/O board
- 24 high-current DIO lines
- IRQ generation from Port C bit 3, and Counter A2 (“C” models) and/or Change-of-State (COS) Detection (“S” models)
- DIO lines buffered
- Four and eight bit ports independently selectable for inputs or outputs
- User configurable 10k ohm Pull-up/Pull-down resistors on DIO lines
- Jumper selectable VCCIO (5V, 3.3V)
- VCCIO voltage available to the user via 0.5A resettable fuse
- Latching 50 pin connector
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40° to +85°C)
- Quick-disconnect tab on mounting bracket for wiring harness or cable shield ground (with non-latching 50 pin connector)
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$209.00 – $239.00 Add To Quote -
Digital I/O
PCIe-DIO-48JPLS Digital I/O Card
Features
- 48 or 24 channel high-current TTL digital I/O lines
- Change of State (COS) detection and interrupt capabilities
- Compatible with industry standard 8255 PPI
- 68-pin SCSI pin-in-socket female connector on card mounting bracket
- User interrupt pin
- All 48 digital I/O lines buffered with 32mA source / 64mA sink
- Four and eight bit ports independently selectable for inputs or outputs
- Jumper configurable pull-ups/-downs on DIO lines
- 5V or 3.3V VCCIO configurable by jumper selection
- Poly-fused VCCIO available to the user on each I/O header
- Easy upgrade from PCI-DIO-48JPLS Family devices
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Non-latching connector
- Card without Change-of-State IRQ feature
- RoHS compliant version
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$378.00 – $454.00 Add To Quote
