68SCSI
Showing all 7 results
-
Cables
C68MM 68-pin SCSI Cable Series
68-pin male to male SCSI ribbon cables of various lengths in inches.
Used to connect our STB-68 screw terminal board with the USB-AIO and Fast USB-DIO Series modules.(0 reviews)$29.00 – $35.00 Add To Quote -
Cables
C68PS18L
The C68PS18L 68-Pin SCSI 18″ round-wire shielded cable is used to connect our STB-68 screw terminal board to the USB-AIO and the Fast USB-DIO Series modules.
(0 reviews)$39.00 Add To Quote -
Digital I/O
PCI-DIO-48S PCI Digital I/O Card w/CoS IRQ
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible
(Call for PCI-Express version availability) - 24 or 48 bits of digital I/O
- Interrupt generation on input change-of-state (Model 48S)
- All I/O lines buffered on the card
- I/O buffers can be enabled/disabled under program control
- Four- and eight-bit ports independently selectable for I/O
- Pull-ups on I/O lines
- +5V supply available to the user
- Compatible with industry standard I/O racks like Gordos, Opto-22, Potter & Brumfield, etc.
- No base address or IRQ switches to set
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)Call – $758.00 Add To Quote - Universal PCI, PCI-X, 3.3V and 5V compatible
-
Serial Communication
PCIe-COM-8SM Multiprotocol Serial Card
Features
- Eight or four-port PCI Express serial communication cards
- Serial protocol (RS-232/422/485) SOFTWARE CONFIGURED per port, stored in EEPROM for auto-configure at next boot
- Low profile PCIe MD2 form factor, works in standard height or low-profile PCIe computers
- High performance 16C950 class UARTs with 128-byte FIFO for each TX and RX
- Supports data communication speeds up to 3Mbps (standard model RS-232 is 460.8kbps)
- ±15kV ESD protection on all signal pins
- Full modem control signals in RS-232 mode
- Software compatible with all operating systems
- Jumper selectable termination per port for RS-485 applications
- 3′ breakout cable included, terminating with industry-standard DB9M connectors (no external breakout box required)
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Also available in RS-485 and RS-422 only versions
- Connector strengthening bracket for secure and fail-proof cable connections
- Extended temperature operation (-40°C to +85°C)
- High-speed RS-232 version up to 921.6kbps
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
- Remote wake-up enable
- Low profile bracket installed for small, embedded PCs
(0 reviews)$314.00 – $599.00 Add To Quote -
Serial Communication
PCIe-COM232-8 Serial Card
Features
- Eight or four-port PCI Express RS-232 serial communication cards
- Low profile PCIe MD1 form factor, MD1 defines the shortest standard card length available
- High performance 16C950 class UARTs with 128-byte FIFO for each TX and RX
- Supports data communication speeds up to 921.6kbps (standard model 460.8kbps)
- ±15kV ESD protection on all signal pins
- Full modem control signals
- Software compatible with all operating systems
- Plug and Play, no jumpers to configure
- 3’ breakout cable included, terminating with industry standard DB9M connectors (no external breakout box required)
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Connector strengthening bracket for secure and fail-proof connections
- Extended temperature (-40°C to +85°C)
- High speed version up to 921.6kbps
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
- Remote wake-up enable
- Low profile bracket installed for small, embedded PCs
(0 reviews)$299.00 – $409.00 Add To Quote -
Digital I/O
PCIe-DIO-48JPLS Digital I/O Card
Features
- 48 or 24 channel high-current TTL digital I/O lines
- Change of State (COS) detection and interrupt capabilities
- Compatible with industry standard 8255 PPI
- 68-pin SCSI pin-in-socket female connector on card mounting bracket
- User interrupt pin
- All 48 digital I/O lines buffered with 32mA source / 64mA sink
- Four and eight bit ports independently selectable for inputs or outputs
- Jumper configurable pull-ups/-downs on DIO lines
- 5V or 3.3V VCCIO configurable by jumper selection
- Poly-fused VCCIO available to the user on each I/O header
- Easy upgrade from PCI-DIO-48JPLS Family devices
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Non-latching connector
- Card without Change-of-State IRQ feature
- RoHS compliant version
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$378.00 – $454.00 Add To Quote -
USB
USB-DIO-16H: 16-bit Family of Digital Waveform I/O USB Modules
FEATURES
- High-speed USB 2.0 device
- 16 high-speed digital I/O lines feature continuous, sustained throughput up to 16 MB/s
- Capable of 80 MB/s bursts with flexible synchronous clock and handshaking capabilities
- Continuous streaming over USB with no maximum waveform length
- On-board embedded FIFO memory up to 128 kByte
- 18 additional digital I/O lines arranged in 4 programmable groups
- All outputs buffered with 24 mA sink/source capabilities
- Type B USB connector features high-retention design
- Standard 68-pin SCSI high density latching connector
- Custom high-speed function driver
- Alternate embedded USB connector
- All required power drawn from USB port, no external power adapter required
- Small, (4″ x 4″ x 1.25″) rugged industrial enclosure
- PC/104 module size and mounting compatibility
- Industrial strength and high-retention Type B USB connector
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer
Configurable power-on defaults
Digital input debouncing and latching
Digital output Pulse Width Modulation (PWM) and Matrix Mapping
FACTORY OPTIONS
- LVTTL for 3.3V applications
- Input only, output only, and input/output versions
- OEM version (board only) features PC/104 module size and mounting compatibility
- External power for high current capabilities
- Extended temperature and DIN rail mounting provisions
- RoHS available, please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$379.00 – $859.00 Add To Quote