...Applications The M.2-ICM422 Series is especially useful in applications where high common-mode external voltages are present. Isolation is required to guard electronics from transient voltage spikes and offers greater common-mode...
...low-profile, latching, 5-pin Hirose connector. Optional breakout cables are available, and bring each port connection to a panel-mountable DB9-M connector. Applications The M.2-ICM485 Series is especially useful in applications where...
...USB-AO Series of USB modules. With the purchase of the MP104-DIN accessory, the STB-74 can be mounted directly to a DIN-Rail. For OEMs using ACCES USB boards, the STB-74 can...
...resistor in series. The inputs may be driven by either DC sources of 3 to 31 volts (rms) or AC sources at frequencies of 40 Hz to 10 KHz. Standard...
...or four -wire cable. The 104-COM-8S Series uses an automatic (AUTO) control. The driver is enabled (and the receiver disabled) when data is ready to be transmitted. When transmission is...
...isolated inputs can be driven by either AC or DC and are not polarity sensitive. Input signals are rectified by opto-coupler diodes. A 1.8KΩ, ½ Watt resistor in series provides...
...½ Watt resistor in series provides current limiting. The input voltage range is 3V to 28V (rms). To extend the input voltage range, you may connect external resistors in series...
...are not polarity sensitive. Input signals are rectified by a diode bridge and applied to the inputs of opto-isolators. A 470 ohm resistor in series provides current limiting. Standard 12/24...
...the USB-AI and Fast USB-DIO Series of USB modules. With the purchase of the MP104-DIN accessory, the STB-68 can be mounted directly to a DIN-Rail. For OEMs using ACCES USB...
...the board can be mounted directly to the enclosure of the USB-DIO-24, USB-DIO-32, USB-DIO-32I, and USB-CTR-15 series of USB modules. With the purchase of the MP104-DIN accessory, the STB-50U can...
