4
- Please choose product options by visiting 104-AO12-4 PC/104 Analog Output Board.
Showing all 12 results
-
PC/104
104-AIO12-8 Multifunction Analog I/O Board
PC/104 Analog I/O Board
Features
- Eight true differential inputs, or eight single-ended inputs optional
- Programmable input ranges of: 0-5V, 0-10V, ±5V, ±10V
- 100KHz sampling rate
- On-board pacer clock and counter timers
- Four double-buffered analog outputs
- Jumper selectable output ranges of: 0-5V, 0-10V, ±5V, ±10V
- 24 digital I/O lines, type 82C55 with change of state detect on port C, buffers on ports A & B
- Flexible configurations to suit your needs
Factory Options: (call for pricing and availability)
- 4-20mA inputs with offset
- Channel by channel pre-amplifier gains of 1-100
- +5VDC only operation
- 0 to +70°C and -40 to +85°C versions available
- RoHS Available. Please contact us for ordering information
(0 reviews)$399.00 – $494.00 Add To Quote -
Analog Output
104-AO12-4 PC/104 Analog Output Board
Features
Analog Output:
- 4 channels, 12 bit resolution
- Selectable unipolar or bipolar ranges 0-5V, 0-10V, ±5V, ±10V
- 100K conversions per second
- 3mA drive
Digital Input/Output:
- 24 parallel bits (two 8 bit ports, two 4 bit ports)
- 64mA sink, 32mA source (ports A and B)
- I/O pulled up to 5V
- Change of state detect on port C
- Type 82C55 PPI mode 0 (1 and 2 optional)
- Industry Standard 50 pin header
Timer/Counter: Type 82C54 (3×16 bit)
- Software Supported Modes:
- Three 16-Bit type 82C54
- Event counter, Frequency output
- Frequency and Pulse measurement
I/O Connectors:
- Two Industry Standard 50 pin headers
RoHS Available. Please contact us for ordering information
(0 reviews)$268.00 Add To Quote -
Analog Output
104-DA12-8A Analog Output Board with Arbitrary Waveform Generation
PC/104 Analog Output Board with Arbitrary Waveform Generation
- Broadly Configurable Arbitrary Waveform Generator (ARB)
- DACs Independently Programmable with Unique Waveforms
- 128K SRAM for ARB data storage
- Independent 12-bit D/A converter per channel
- DACs independently or simultaneously updated
- Output ranges of 0-5, 0-10, +/-5, +/-10V, corresponding 4-20mA output
- 32-bit counter for precisely timed outputs
- 16-bit counter for interrupt generation
- On-board DC/DC converter allows operation on +5V power
- Optional -40 to +85°C operating temperature
- Available in 4 and 8 channels, with or without the ARB
- RoHS Available. Please contact us for ordering information
(0 reviews)$304.00 – $669.00 Add To Quote -
Digital I/O
ENET-AIO16-16F Ethernet Multifunction Module — Preliminary
Features
- Ethernet 10/100/1000 Multifunction DAQ
- Sustained sampling speeds up to 1MHz
- 16-bit or 12-bit resolution A/D converter
- Flexible, software configured functionality
- 16 single-ended or 8 differential analog inputs
- 8 input ranges, 4 unipolar and 4 bipolar, channel-by-channel programmable
- Autocalibration and filtering onboard for accurate data
- Four 16-bit analog outputs with 4 factory ranges
- 16 high-current digital I/O lines
- TCP packet interface with Windows DLL API wrapper
- Small, (4″x4″x1.7″) rugged, steel industrial enclosure
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +80°C)
- OEM version (board only), features PC/104 size and mounting compatibility
- DIN rail mounting provision
- RoHS available, please contact us for ordering information
(0 reviews)$1,499.00 – $2,639.00 Add To Quote -
Analog Input
M.2-ADIO16-8F M.2 Card with 8 Single-Ended or 4 Differential Analog Inputs, 4 Analog Outputs, & 16 DIO
FEATURES
- M.2 2260/2280 “B/M” size Card with latching I/O connectors
- 16-Bit 1MSPS Complete Data Acquisition System
- Sustained Sampling Rates Up To 1MHz
- High Impedance, 8-Channel Input: 1 MΩ
- Differential Input Voltage Ranges from ±0.64V to ±24.576V
- Flexible, Software Configured Functionality
- 8 Pseudo-differential (Single-Ended) or 4 Differential Inputs
- Fast DMA transfers from 4 kSample FIFO
- Four 16-Bit Analog Outputs
- Independently Programmable Output Ranges:
0V To 5V, 0V To 10V, ±2.5V, ±5V, ±10V - Outputs Drive ±10Ma Guaranteed
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- Independently Programmable Output Ranges:
- 16 Digital lines with alternate functions including ADC and DAC Trigger
- RoHS Standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 4-20mA or 10-50mA ADC input ranges
(Single Ended or Differential options) - Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$249.00 – $669.00 Add To Quote -
Analog Input
mPCIe-ADIO16-8F PCI Express Mini Card Family with 8 Single-ended or 4 Differential Analog Inputs, 4 Analog Outputs, & 16 DIO
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, Multi-Function DAQ with latching I/O connectors
- 16-Bit 1MSPS Complete Data Acquisition System
- Sustained Sampling Rates Up To 1MHz
- High Impedance, 8-Channel Input: 1 MΩ
- Differential Input Voltage Ranges from ±0.64V to ±24.576V
- Flexible, Software Configured Functionality
- 8 Pseudo-differential (Single-Ended) or 4 Differential Inputs
- Fast DMA transfers from 4 kSample FIFO
- Four 16-Bit Analog Outputs
- Independently Programmable Outputs: 0V To 5V, 0V To 10V, ±2.5V, ±5V, ±10V
- Outputs Drive ±10mA Guaranteed
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- 16 Digital lines with alternate functions including ADC and DAC Trigger
- RoHS Standard
- Available now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 4-20mA or 10-50mA ADC input ranges
(Single Ended or Differential options) - Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$249.00 – $669.00 Add To Quote -
Analog Input
PCIe-ADIO16-16F PCI Express Card Family with 16 SE or 8 Differential AI, 4 AO, 16 DIO
FEATURES
- PCI Express Half-Height/Length with Latching I/O Connector
- 2× 16-Bit, Bipolar, Differential, A/D Converters Sampling at up to 1Mhz, Simultaneously
- Software Selectable as 16+0, 8+4, or 0+8 (Single-Ended + Differential Inputs)
- 7 Channel-By-Channel Programmable Differential Input Ranges from ±0.3125V up to ±12V (48Vp-P)
- A/D Starts Via Software, External Input, or Periodic Timer
- A/D “Scan Start” Mode Optimizes Inter-Channel Timing
- High Impedance, 8-Channel Input: 500 MΩ
- 4 kSample FIFO plus DMA for Efficient, Robust Data Streaming
- 16× Digital I/O Pins with Flexible Secondary Functions
- Four 16-Bit Analog Outputs
- 5 Per-Channel Programmable Ranges: 0V to 5V, 0V to 10V, ±2.5V, ±5V, ±10V (optional 4-20mA)
- Outputs Drive ±10Ma Guaranteed
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- Onboard Watchdog with Dedicated Status Output
- RoHS Compliant
FACTORY OPTIONS
- 4-20mA or 10-50mA (Single Ended or Differential) ADC Input Ranges
- 4-20mA Output Range
- Extended Temperature Operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$469.00 – $1,219.00 Add To Quote -
Analog Output
M.2-AIO16-16F M.2 Card with 16 Single-Ended or 8 Differential Analog Inputs and 4 Analog Outputs
FEATURES
- M.2 2260/2280 “B/M” size Card with latching I/O connectors
- 2× 16-bit, bipolar, differential, A/D converters sampling at up to 1MHz, simultaneously (2MSPS aggregate)
- Software selectable as 16+0, 8+4, or 0+8 (single-ended + differential inputs)
- Seven channel-by-channel Programmable differential input ranges from ±0.3125V up to ±12V
- A/D starts via software, external input, or periodic timer
- A/D “scan start” mode optimizes inter-channel timing
- High Impedance, 16-channel input: 500 MΩ
- 4 kSample FIFO plus DMA for efficient, robust data streaming
- Four 16-Bit Analog Outputs
- 5 per-channel programmable ranges: 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Outputs drive ±10mA
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- Two digital I/O with flexible secondary functions
- Onboard watchdog with status output
- RoHS Standard
- Works in your computers’ NVME slots!
- Available Now in mPCIe form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 4-20mA or 10-50mA ADC input ranges
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$319.00 – $859.00 Add To Quote -
Analog Output
mPCIe-AIO16-16F PCI Express Mini Card with 16 Single-Ended or 8 Differential Analog Inputs, 4 Analog Outputs, & 2 DIO
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, Multi-Function DAQ with latching I/O connectors
- 2× 16-bit, bipolar, differential, A/D converters sampling at up to 1MHz, simultaneously (2MSPS aggregate)
- Software selectable as 16+0, 8+4, or 0+8 (single-ended + differential inputs)
- Seven channel-by-channel Programmable differential input ranges from ±0.3125V up to ±12V
- A/D starts via software, external input, or periodic timer
- A/D “scan start” mode optimizes inter-channel timing
- High Impedance, 16-channel input: 500 MΩ
- DMA+FIFO (4 kSamples) for efficient, robust data streaming
- Four 16-Bit Analog Outputs
- 5 per-channel programmable ranges: 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Outputs drive ±10mA
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- Two digital I/O with flexible secondary functions
- Onboard watchdog with status output
- RoHS Standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 4-20mA or 10-50mA ADC input ranges
- Extended temperature operation (-40°C to +85°C)
- Vibration-resistant epoxy and/or conformal coating
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$319.00 – $859.00 Add To Quote -
Analog Output
PCI-DA12-2/4/6 & PCI-DA12-8/16
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Two, four, six, eight and sixteen (respectively), 12-Bit, double-buffered, digital-to-analog converters
- Program control provides means for either individual update or simultaneous update of the DACs. The 8 and 16 channel models can use the counter-timer to generate DAC updates, and/or IRQs. The 2/4/6 models can use an external signal in this way.
- Unique, automatic control of DAC outputs to prevent spurious outputs at power-on
- 24-bits (PCI-DA12-8/16) or 16-bits (PCI-DA12-2/4/6) digital I/O buffered with tri-stateable transceivers
- Three 16-bit Down counters (models PCI-DA12-8/16 only)
- Resettable-fused +5VDC available for external use
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$1,258.00 – $4,278.00 Add To Quote -
Analog Output
PCIe-DA16-6 Family Analog Output Cards
Features
- 6-channel, 16-bit, digital-to-analog PCI Express Card
- Software / Hardware compatible with PCI-DA12-6
- >125k conversions per channel per second
- Dip-switch selectable analog output ranges:
0-2.5V, 0-5V, 0-10V, ±2.5V, ±5V, ±10V, 4-20mA - Individual or simultaneous update of the DACs
- DACs restricted at power-on to prevent spurious outputs
- 16-bits of digital I/O
- VCCIO voltage available to the user via 0.5A resettable fuse
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
Factory Options
- Industrial Temperature (-40°C to +85°C)
- RoHS compliant version
(0 reviews)$449.00 – $699.00 Add To Quote -
Analog Output
USB-AO16-16A Analog Output Module
Features
- 4, 8, or 16 analog outputs with 12 or 16-bit resolution
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- Unipolar and bipolar output ranges of 0-10V, ±5V (contact factory for additional ranges)
- Real-time hardware calibration per channel
- Update outputs individually or simultaneously at speeds up to 4kHz
- Two 16-bit analog inputs and 16 lines of digital I/O
- All digital I/O lines buffered with 10mA source, 24mA sink current capabilities
- Resettable 0.5A fused +5V available to the user
- Includes external AC to 12V @ 1Amp DC regulated adapter
- Connections made via industry-standard 37-pin D-Sub connectors
- USB/104 form-factor for OEM embedded applications
- Standard (enclosed) version includes external 12V power supply (USB-PWR-12V)
- OEM version (board only) features PC/104 module size and mounting compatibility
- Alternate micro-fit embedded USB header connector
- Custom high-speed function driver (non-HID)
- Type B USB connector features industrial strength and high-retention design
- Small, (4″ x 4″ x 1.25″) rugged, industrial enclosure
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended operating temperature (-40° to +85°C)
- Analog output ranges (±10V, 0-5V, or nearly anything you specify!)
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- Screw terminals for 12V input power connection
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$329.00 – $769.00 Add To Quote