24 I/O (8/8/4/4)
- Please choose product options by visiting PCIe-DIO-24HC: PCI Express Digital I/O Card with Counters and IRQ.
Showing 1–15 of 22 results
-
PC/104
104-AIO12-8 Multifunction Analog I/O Board
PC/104 Analog I/O Board
Features
- Eight true differential inputs, or eight single-ended inputs optional
- Programmable input ranges of: 0-5V, 0-10V, ±5V, ±10V
- 100KHz sampling rate
- On-board pacer clock and counter timers
- Four double-buffered analog outputs
- Jumper selectable output ranges of: 0-5V, 0-10V, ±5V, ±10V
- 24 digital I/O lines, type 82C55 with change of state detect on port C, buffers on ports A & B
- Flexible configurations to suit your needs
Factory Options: (call for pricing and availability)
- 4-20mA inputs with offset
- Channel by channel pre-amplifier gains of 1-100
- +5VDC only operation
- 0 to +70°C and -40 to +85°C versions available
- RoHS Available. Please contact us for ordering information
(0 reviews)$399.00 – $494.00 Add To Quote -
Analog Output
104-AO12-4 PC/104 Analog Output Board
Features
Analog Output:
- 4 channels, 12 bit resolution
- Selectable unipolar or bipolar ranges 0-5V, 0-10V, ±5V, ±10V
- 100K conversions per second
- 3mA drive
Digital Input/Output:
- 24 parallel bits (two 8 bit ports, two 4 bit ports)
- 64mA sink, 32mA source (ports A and B)
- I/O pulled up to 5V
- Change of state detect on port C
- Type 82C55 PPI mode 0 (1 and 2 optional)
- Industry Standard 50 pin header
Timer/Counter: Type 82C54 (3×16 bit)
- Software Supported Modes:
- Three 16-Bit type 82C54
- Event counter, Frequency output
- Frequency and Pulse measurement
I/O Connectors:
- Two Industry Standard 50 pin headers
RoHS Available. Please contact us for ordering information
(0 reviews)$268.00 Add To Quote -
PC/104
104-DIO-48E/24E Digital I/O Cards
Features
- 48 Parallel Bits of Digital I/O Type 82C55 PPI mode 0
- Compatible with Opto-22 type Solid State Module Racks
- Two 24 bit groups (two 8 bit ports, two 4 bit ports each group)
- All bits are buffered, 64mA sink, 32m A source
- I/O pulled up to 5V for Contact Monitoring, Pulldown resistors are an option (factory installation)
- Fused (resetable) 5V available on pin 49 of each group
- I/O connectors: Two Industry Standard 50 pin headers plus one ten-pin header for counter timer
Factory Options: (call for pricing and availability)
- 82C54 with three 16-bit counter/timers for event counting, frequency output, pulse width and frequency measurement
- 0 to 70°C and -40 to +85°C versions available
- Pull-down resistors on I/O lines
- RoHS Available. Please contact us for ordering information
(0 reviews)$129.00 – $179.00 Add To Quote -
Digital I/O
104-DIO-48S Digital I/O Board w/CoS IRQ
Features
- 48 or 24 parallel lines of 82C55 digital I/O with tristate buffers prevent unintended control of external equipment
- IRQ on input change of state (COS) eliminates the need for constant polling
- High sink/source current 64mA/32mA
- I/O pulled up to 5V for contact monitoring
- Compatible with Opto-22 and other industry standard I/O racks
Factory Options: (call for pricing and availability)
- 82C54 with three 16-bit counter/timers for event counting, frequency output, pulse width and frequency measurement
- 0 to 70°C and -40 to +85°C versions available
- Economy version without COS feature
- Pull-down resistors on I/O lines
- RoHS Available. Please contact us for ordering information
(0 reviews)$164.00 – $239.00 Add To Quote -
Analog Output
DA-06A ISA Bus Six Channel Analog Output Card with Voltage and Current Outputs
Features
- Six independent analog outputs
- 12-Bit resolution
- Voltage Output Ranges: 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Current Output Ranges: 0-20mA, 4-20mA
- Individual range selection per channel
- Three update modes including simultaneous update
- Additional 24-bit parallel digital input/output port
- Setup and calibration software included
- Designed, made, supported, and manufactured in the USA
Factory Options
- Current Output Ranges: 0-50mA and 10-50mA optional
(0 reviews)Call Add To Quote -
Digital I/O
ETH-DIO-48 Ethernet Digital I/O Module
SPECIFICATIONS
Features
- Ethernet 10/100 RJ45 connector for interfacing to CPU or network
- 48 or 24 channel high-current TTL digital I/O lines
- Compatible with industry standard I/O racks such as Grayhill, Opto 22, Western Reserve Controls, etc.
- Eight-bit ports software selectable for inputs or outputs
- All 48 digital I/O lines buffered with 32 mA source / 64mA sink current capabilities
- Jumper selectable I/O pulled up to 5V (via 10KΩ) for contact monitoring, pulled down to ground or floating
- DHCP or static IP assignment
- 5VDC regulated external power supply included
- Resettable 0.5A fused +5VDC output per I/O connector
- Standard 50-pin IDC-type shrouded connectors with key
- Small, (4″x4″x1.7″) rugged, steel industrial enclosure
- Designed, made, supported, and manufactured in the USA
Factory Options
- Low-voltage (LVTTL) for 3.3V applications
- Industrial operating temperature (-40°C to +80°C)
- OEM version (board only), features PC/104 size and mounting compatibility
- Order with our IOB-48 for 48 channels of output isolation
- DIN rail mounting provision
- RoHS available, please contact us for ordering information
(0 reviews)$179.00 – $719.00 Add To Quote -
Digital I/O
M.2-DIO-24X 24-Channel Digital I/O with Digital Integration Features on M.2
FEATURES
-
- With Digital Integration Features!
- Outputs with pulse/train / PWM / frequency generation, Inputs with digital filtering and flexible measurement of pulse duration, frequency, and event counting, IRQ generation and more.
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 24 high-current LVTTL DIO lines (24ma source/sink)
- Change-of-State (COS) detection IRQ generation
- 10k ohm pull-up resistors
- Four and eight bit ports independently software selectable for use as inputs or outputs
- All signals brought out to optional panel-mountable 37-pin male D-Sub connector
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +85°C)
- TTL signaling with user supplied VCCIO (5V)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$333.00 – $385.00 Add To Quote -
-
Digital I/O
M.2-DIO-24S Digital I/O Card
FEATURES
- M.2 2260/2280 “B/M” size Card with latching I/O connectors
- 24 high-current LVTTL DIO lines (24ma source/sink)
- Change-of-State (COS) detection IRQ generation
- 10k ohm pull-up resistors
- Four and eight bit ports independently software selectable for use as inputs or outputs
- All signals brought out to optional panel-mountable 37-pin male D-Sub connector
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +85°C)
- CMOS signaling with user supplied VCCIO (5V)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$208.00 – $238.00 Add To Quote -
Digital I/O
mPCIe-DIO-24X: PCI Express Mini Card with 24 Digital I/O and Digital Integration Features!
FEATURES
-
- With Digital Integration Features!
- Outputs with pulse/train / PWM / frequency generation, Inputs with digital filtering and flexible measurement of pulse duration, frequency, and event counting, IRQ generation and more.
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 24 high-current LVTTL DIO lines (24ma source/sink)
- Change-of-State (COS) detection IRQ generation
- 10k ohm pull-up resistors
- Four and eight bit ports independently software selectable for use as inputs or outputs
- All signals brought out to optional panel-mountable 37-pin male D-Sub connector
- RoHS standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +85°C)
- TTL signaling with user supplied VCCIO (5V)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$333.00 – $385.00 Add To Quote -
-
Digital I/O
mPCIe-DIO-24S: mPCIe 24 x Digital I/O Card w/CoS IRQ
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 24 high-current LVTTL DIO lines (24ma source/sink)
- Change-of-State (COS) detection IRQ generation
- 10k ohm pull-up resistors
- Four and eight bit ports independently software selectable for use as inputs or outputs
- All signals brought out to optional panel-mountable 37-pin male D-Sub connector
- RoHS standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +85°C)
- CMOS signaling with user supplied VCCIO (5V)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$208.00 – $238.00 Add To Quote -
Analog Output
PCI-DA12-2/4/6 & PCI-DA12-8/16
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Two, four, six, eight and sixteen (respectively), 12-Bit, double-buffered, digital-to-analog converters
- Program control provides means for either individual update or simultaneous update of the DACs. The 8 and 16 channel models can use the counter-timer to generate DAC updates, and/or IRQs. The 2/4/6 models can use an external signal in this way.
- Unique, automatic control of DAC outputs to prevent spurious outputs at power-on
- 24-bits (PCI-DA12-8/16) or 16-bits (PCI-DA12-2/4/6) digital I/O buffered with tri-stateable transceivers
- Three 16-bit Down counters (models PCI-DA12-8/16 only)
- Resettable-fused +5VDC available for external use
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$1,258.00 – $4,278.00 Add To Quote -
Digital I/O
PCI-DIO-24D/H PCI 24-Bit Digital I/O Cards
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible
- PCI Express versions available:
- For the PCI-DIO-24D: PCIe-DIO-24D
- For the PCI-DIO-24H: PCIe-DIO-24H
- 24 bits of digital I/O
- Four and eight bit ports independently selectable for I/O
- All 24 I/O lines buffered by transceivers on the card
- I/O buffers can be enabled/disabled under program control
- Pull-ups on I/O lines
- Resettable fused +5 VDC output available
- PCI-DIO-24H compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, Potter and Brumfield, etc.
- Optional 10 MHz counters
- Automatically detected under Windows
- No base address or IRQ switches to set
Factory Options
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$458.00 – $488.00 Add To Quote -
Digital I/O
PCI-DIO-48H PCI Digital I/O Card w/CoS IRQ DISCONTINUED
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible
- 48 bits of digital I/O
- All I/O lines buffered on the card
- I/O buffers can be enabled/disabled under program control
- Four- and eight-bit ports independently selectable for I/O
- Pull-ups on I/O lines
- +5V supply available to the user
- No base address or IRQ switches to set
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)Call Add To Quote -
Digital I/O
PCI-DIO-48JP/JPS/JPL/JPLS: PCI Digital I/O Cards w/CoS IRQ
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible
(PCI-Express versions available) - 48 bits of digital I/O
- Interrupt generation on input change-of-state (“S” versions)
- All I/O lines buffered on the card
- I/O buffers can be enabled/disabled under program control
- Four- and eight-bit ports independently selectable for I/O
- Pull-ups on I/O lines
- +5V supply available to the user
- 68-pin SCSI type connector
- No base address or IRQ switches to set
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$630.00 – $758.00 Add To Quote - Universal PCI, PCI-X, 3.3V and 5V compatible
-
Digital I/O
PCI-DIO-48S/48/24S PCI Digital I/O Cards w/CoS IRQ
Features
- Universal PCI, PCI-X, 3.3V and 5V compatible
(PCI-Express versions available) - 24 or 48 bits of digital I/O
- Interrupt generation on input change-of-state (“S” versions)
- All I/O lines buffered on the card
- I/O buffers can be enabled/disabled under program control
- Four- and eight-bit ports independently selectable for I/O
- Pull-ups on I/O lines
- +5V supply available to the user
- 50-pin headers are compatible with industry standard I/O racks like Gordos, Opto-22, Potter & Brumfield, etc.
- No base address or IRQ switches to set
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$478.00 – $698.00 Add To Quote - Universal PCI, PCI-X, 3.3V and 5V compatible