DB9M
Showing all 8 results
-
Accessories
ANDROID-232 Controls Legacy RS-232 Devices from Android Devices
Features
- Android USB 2.0 Full-Speed Host to industry standard RS-232 DB9M serial port
- Supports UART interface with RX, TX, RTS and CTS
- RX buffer size 5512 bytes; TX buffer size 256 bytes
- Supports baud rates up to 460.8kbps, 921.6kbps optional
- Use with any Android platform supporting Android Open Accessory Mode (typically 3.1 or above)
- ±15kV ESD protection on USB data lines and all RS-232 signals
- Status and fault LEDs including external power, charging status, and USB status
- Supports USB charging for Android devices
- Type A USB connector features industrial strength high retention design
- Latching +5V external power input connector with external regulated power supply
- Industrial operating temperature (-40°C to +85°C) standard
- A hard line wired connection eliminates security concerns associated with Wi-Fi and other radio frequency solutions
- RoHS Compliant
FACTORY OPTIONS
- RJ12 female for RS-232, including GPS signals on RJ12 and J5 connector
- RJ45 connector with Cisco pinout
- RJ12 connector
- Baud rates up to 921.6kbps
- RoHS Available. Please contact us for ordering information
(0 reviews)$139.00 Add To Quote -
Accessories
CONV232/485 and CONV232/422
FEATURES
- Balanced-mode, long-distance RS-485 and RS-422 communication with no internal installation
- External power not needed for small networks
- Nothing to configure; automatically detects baud rate and format
- Designed, made, supported, and manufactured in the USA
(0 reviews)$49.00 Add To Quote -
Serial Communication
LPCI-COM-1S
FEATURES
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Supports RS-422 and RS-485 protocols
- Automatic control of RS-485 driver under all operating systems
- Includes type 16550 UART with 16-byte FIFO buffers
- Baud rates up to 460,800 baud
- Detected as standard COM port by all operating systems
- No base address or IRQ switches to set
- Meets MD1 PCI Low Profile Specification
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
- Designed, made, supported, and manufactured in the USA
(0 reviews)$164.00 Add To Quote -
Serial Communication
PCI-ICM-1S
FEATURES
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Optically isolated, asynchronous serial communications
- Supports RS-422 and RS-485 protocols
- Automatic control of RS-485 driver under all operating systems
- Includes type 16550 UART with 16-byte FIFO buffers
- Baud rates up to 460,800 baud
- Detected as standard COM port by all operating systems
- No base address or IRQ switches to set
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
- Designed, made, supported, and manufactured in the USA
(0 reviews)$219.00 Add To Quote -
PCIe
PCIe-COM-4SM(DB/RJ): PCI Express DB/RJ Multiprotocol Serial Card Family
Features
- Four and two-port PCI Express serial communication cards with on board DB9M or RJ45 connectivity
- Serial protocol (RS-232/422/485) SOFTWARE CONFIGURED per port, stored in EEPROM for auto-configure at next boot
- High performance 16C950 class UARTs with 128-byte FIFO for each transmit and receive buffer
- Supports data communication speeds up to 3Mbps (standard model RS-232 is 460.8kbps)
- ±15kV ESD protection on all signal pins
- Supports 9-bit data mode
- Full modem control signals in RS-232 mode
- Software compatible with all operating systems
- Selectable termination for RS-485 applications
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40° to +85°C)
- High-speed RS-232 version up to 921.6kbps
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
- Remote wake-up enable on COM A
(0 reviews)$179.00 – $339.00 Add To Quote -
Serial Communication
PCIe-ICM-4SM Multiprotocol Serial Card Family
Features
- 4 and 2-port PCI Express serial communication cards with DB9M connectivity
- 1.7kV isolation port-to-port and port to computer on ALL signals
- Serial protocol (RS-232/422/485) SOFTWARE CONFIGURED per port, stored in EEPROM for auto-configure at next boot
- High performance 16C950 class UARTs with 128-byte FIFO for each transmit and receive buffer
- Supports data communication speeds up to 3Mbps (RS-232 up to 921.6 kbps)
- Virtually any custom baud rate may be configured by the user via register settings, no custom oscillator needed
- ±15kV ESD protection on all signal pins
- 9-bit data mode and RS-485 full-duplex (4-wire) fully supported
- Full modem control signals in RS-232 mode
- Software compatible with all operating systems
- Selectable termination for RS422 or RS-485 applications
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- High-speed RS-232 version up to 921.6kbps
- Extended temperature operation (-40°C to +85°C)
- RS-422/485 only versions
- Remote Wake-Up Enable
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$299.00 – $529.00 Add To Quote -
USB
USB-232-IND, USB-422-IND, USB-485-IND, USB-422-485-IND
FEATURES
- RoHS compliant, single-port serial communications adapter for USB 2.0 or 3.0
- Add a RS-232, RS-422 or RS485 serial port to any USB equipped computer
- Compact, industrial, military-grade metal backshell
- Industrial operating temperature (-40°C to +85°C) standard
- Includes type FT232R UART with 128-byte receive/256-byte transmit FIFO buffers
- Supports 7 or 8 data bits, 1 or 2 stop bits, and odd /even / mark / space / no parity
- ±15kV ESD Protection (IEC 6100) on all RS-232/422/485 signals protects against spikes and ground loops
- Fully shielded cable protects data from EMI and RF interference
- Software programmable baud-rates
- All required power drawn from host USB port, no external power adapter required
- Supported for use in Windows (including Windows CE) and Linux operating systems
- Designed, made, supported, and manufactured in the USA
USB-232-IND
- Supports all RS-232 signals, including handshaking
- Data transfer speeds up to 1Mbps asynchronous
USB-422-IND
- Supports full-duplex (4-wire) RS-422 protocol
- Data transfer speeds up to 3Mbps asynchronous
USB-485-IND
- Supports multi-drop (2-wire, half-duplex) RS-485 protocol
- Data transfer speeds up to 3Mbps asynchronous
USB-422-485-IND
- Supports full-duplex RS-422/485 protocol
- Supports 4-wire RS-485 protocol
- Data transfer speeds up to 3Mbps asynchronous
- Pinout compatible with legacy model USB-485
FACTORY OPTIONS
- Removal of RC Termination from receiver lines (RS-422 and RS-485 models)
- To fully comply with IEC60945 and IACS E10, the factory option Halogen Free Flame retardant (HFFR) cable is required
(0 reviews)$98.00 – $119.00 Add To Quote -
USB
USB-FLEXCOM4: Four-port Multiprotocol Serial USB Module
Features
- Four-port serial communications adapter
- Full-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- Supports field selectable RS-232, RS-422 or RS-485 protocols, per port
- Includes type FT232BM UART with 384-byte receive/128-byte transmit FIFO buffers
- Speeds up to 921.6kbps simultaneously
- Power LED and individual port activity LEDs next to the USB and each COM connector
- All required power drawn from USB port, no external power adapter required
- Compact, low profile enclosure
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- OEM board with 10-pin vertical male headers instead of DB9s
- Extended operating temperature (-40°C to +85°C)
- DIN rail mounting provision
- RoHS Available. Please contact us for ordering information
APPLICATIONS
- Multiple POS peripherals
- Barcode scanners
- Scales
- Date-entry terminals
- Data acquisition and automation modules
(0 reviews)$269.00 – $339.00 Add To Quote